Zoning with zone valves

PLUS LINE Indirect-Fired Water Heaters – Series 3

gas

Install system water piping (space heating) (continued)

Figure 12 Zone valve zoning plus optional water

1. Connect boiler to system as shown in Figure 12

heater piping

when zone valve zoning. The primary/secondary

piping shown ensures the boiler loop will have suf-

ficient flow. It also avoids applying the high head

of the boiler circulator to the zone valves.

2. Connect water heater (domestic hot water) pip- ing to indirect storage water heater as shown in Section A of this manual.

The PhD Control Module turns off space heating during water heater heat- ing. The boiler circulator will turn off, preventing hot water from circulating to the system. The flow/check valve shown on the boiler outlet piping prevents grav- ity circulation in the boiler loop during water heater heating.

3. Controlling the system circulator

a. To cycle the system circulator from the PhD control module, add a circulator relay wired to the boiler circulator terminals as shown on page 30.

NOTE 1: To ensure adequate flow rate through the boiler, use the following pipe size on all boiler loop piping (connecting boiler to and from the primary/secondary connection, item 21):

-80 or -105 – 1” or larger.

-155 or -230 – 1¼” or larger. -310 – 1½” or larger.

Use at least the minimum piping size above and pipe the boiler using only pri- mary/secondary piping as shown. Failure to follow these guidelines could result in system problems.

Legend

Figure 12

1 boiler

2PLUS-Line indirect water heater

3Boiler relief valve (see boiler manual for piping details)

4Boiler relief valve discharge piping (see boiler manual for details)

5Water heater circulator (see page 7 for suggested sizing)

6Isolation valves

7System circulator

9Air separator [with automatic air vent only on systems using diaphragm (or bladder) type expansion tank]

10Flow/check valves (with weighted seats to prevent gravity circulation)

11Purge/drain valves

12Boiler circulator

13Zone valves, typical

20Make-up water supply

21Primary/secondary connection

8Diaphragm (or bladder) type expansion tank (see page 3 for piping of closed-type expansion tank, if used)

26	Part Number PLUS-E017-A/1206

PLUS-E017-A/1206 specifications

The Weil-McLain PLUS-E017-A/1206 is a high-performance heating boiler that reflects the brand's commitment to quality engineering and advanced technology. This model is renowned for its efficiency and reliability, making it a preferred choice for both residential and commercial heating applications.

One of the standout features of the PLUS-E017-A/1206 is its exceptional efficiency rating. The boiler employs advanced condensing technology, which allows it to utilize the latent heat in exhaust gases. This means it can achieve efficiency levels of over 90%, significantly reducing energy consumption and lowering utility bills. The unit also complies with stringent regulatory standards, making it an environmentally friendly heating solution.

The PLUS-E017-A/1206's compact design is another significant characteristic, allowing for easy installation even in limited spaces. It is built with durable materials that enhance its longevity and efficiency. The sleek appearance of the unit also makes it suitable for various settings, maintaining aesthetic appeal while delivering powerful heating performance.

This boiler is equipped with advanced controls and a user-friendly interface, offering precise temperature management and efficient operation. The control panel showcases a digital display, enabling easy monitoring of system performance. Additionally, it allows for integration with smart home systems, providing users with enhanced control over their heating systems remotely.

Safety features are paramount in the PLUS-E017-A/1206. It includes multiple safety mechanisms designed to prevent overheating and pressure issues, ensuring worry-free operation. These elements, combined with Weil-McLain’s reputation for durable construction, contribute to the boiler’s overall reliability.

The PLUS-E017-A/1206 is designed with ease of maintenance in mind. It features accessible components that can be easily serviced, minimizing downtime and reducing maintenance costs. With Weil-McLain’s extensive network of support, users can rely on expert assistance when needed.

Overall, the Weil-McLain PLUS-E017-A/1206 is a robust heating solution that combines efficiency, safety, and advanced technology. Its range of features makes it an excellent choice for those seeking a dependable boiler that delivers consistent performance and energy savings. Whether for a home or business, the PLUS-E017-A/1206 represents a smart investment in heating technology.