Weil-McLain PLUS-E017-A/1206 specs

PLUS LINE Indirect-Fired Water Heaters – Series 3

B2		gas

	Install boiler-to-water heater piping

Combined space heating/water heating applications

1.Figure 14 shows recommended piping between Gas boiler and PLUS water heater. All show direct connection of the water heater piping to the boiler because the boiler circulator shuts down during water heater operation.

2.Table 3, page 29, uses the recommended flow rates for the PLUS water heater and minimum flow rates for the Gas boiler to provide recommended water heater piping and circulator sizing. If using another circulator, verify it is at least equal to the Taco selection given in Table 3, page 29. For general information on head loss through boiler and

boiler-to-water heater piping, refer to the Gas Boiler Manual.

3.Procedure:

Step 1: Select Gas Boiler model and water heater model in Table 3, page 29.

Step 2: Read recommended minimum flow rate, GPM, in table.

Step 3: Read across to find recommended minimum pipe size for boiler-to-water heater piping.

Step 4: Read across to find recommended Taco circulator model. Use a circulator with a pump curve at least equal to the Taco circulator shown. See Figure 16, page 29 for pump curves of typical Taco circulators.

Figure 14 Boiler-to-water heater piping — Combined space heating/water heating application

3Boiler relief valve (see Boiler Manual for piping details)

4Relief valve discharge piping (see Boiler Manual for details)

5Water heater circulator — must be at least equal in capacity to circulator recommended in Table 3, page 29

6Isolation valves

10Flow/check valve (with weighted seat to prevent gravity circulation)

11Purge/drain valves

Dedicated water heating-only applications

1.Figure 15 shows recommended piping between Gas Boiler and PLUS water heater for dedicated water-heating only applications.

2.Pipe sizing:

Table 4, page 29, provides the recommended minimum pipe size for boiler-to-water heater piping.

3.Circulator:

Use the circulator recommended in Table 4, page 29. Install the circulator as shown in Figure 15.

4.Procedure:

Step 1: Select Gas Boiler model and water heater model in Table 4, page 29.

Step 2: Read flow rate expected using the circulator speci- fied inthe last column.

Step 3: Size connecting piping as listed under “Boiler pip- ing” in the table.

Figure 15 Boiler-to-water heater piping — Dedicated water-heating only application

3Boiler relief valve (see Boiler Manual for piping details)

4Relief valve discharge piping (see Boiler Manual for details)

5Water heater circulator — (see Table 4, page 29)

8Expansion tank (diaphragm or bladder type)

6Isolation valves

10Flow/check valve (with weighted seat)

11Purge/drain valve

20 Fill line to fill valve (item 23)

28	Part Number PLUS-E017-A/1206

PLUS-E017-A/1206 specifications

The Weil-McLain PLUS-E017-A/1206 is a high-performance heating boiler that reflects the brand's commitment to quality engineering and advanced technology. This model is renowned for its efficiency and reliability, making it a preferred choice for both residential and commercial heating applications.

One of the standout features of the PLUS-E017-A/1206 is its exceptional efficiency rating. The boiler employs advanced condensing technology, which allows it to utilize the latent heat in exhaust gases. This means it can achieve efficiency levels of over 90%, significantly reducing energy consumption and lowering utility bills. The unit also complies with stringent regulatory standards, making it an environmentally friendly heating solution.

The PLUS-E017-A/1206's compact design is another significant characteristic, allowing for easy installation even in limited spaces. It is built with durable materials that enhance its longevity and efficiency. The sleek appearance of the unit also makes it suitable for various settings, maintaining aesthetic appeal while delivering powerful heating performance.

This boiler is equipped with advanced controls and a user-friendly interface, offering precise temperature management and efficient operation. The control panel showcases a digital display, enabling easy monitoring of system performance. Additionally, it allows for integration with smart home systems, providing users with enhanced control over their heating systems remotely.

Safety features are paramount in the PLUS-E017-A/1206. It includes multiple safety mechanisms designed to prevent overheating and pressure issues, ensuring worry-free operation. These elements, combined with Weil-McLain’s reputation for durable construction, contribute to the boiler’s overall reliability.

The PLUS-E017-A/1206 is designed with ease of maintenance in mind. It features accessible components that can be easily serviced, minimizing downtime and reducing maintenance costs. With Weil-McLain’s extensive network of support, users can rely on expert assistance when needed.

Overall, the Weil-McLain PLUS-E017-A/1206 is a robust heating solution that combines efficiency, safety, and advanced technology. Its range of features makes it an excellent choice for those seeking a dependable boiler that delivers consistent performance and energy savings. Whether for a home or business, the PLUS-E017-A/1206 represents a smart investment in heating technology.

Install boiler-to-water heater piping