Heatiator BCDV36 manual Seasonal Checklist, Prior to Operation, Standing Pilot Operation

Page 20

BUILDER'S CHOICE SERIES INSTALLATION INSTRUCTIONS

WARNING!

Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the same room as the appliance.

CAUTION:

Any safety screen or guard removed for servicing an appliance must be replaced prior to operating this appliance. Clothing or other flammable material should not be placed on or near the appliance.

L. SEASONAL CHECKLIST

Note: Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air passageways of the appliance be kept clean.

WARNING!

Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

1. PRIOR TO OPERATION

Before operating this appliance, have a qualified technician:

a.Review proper placement of logs, rock wool and vermiculite.

b.Check wiring.

c.Ensure there are no gas leaks.

d.Ensure the glass is sealed and in proper position.

e.Ensure the flow of combustion and ventilation air is not obstructed.

f.Check the air shutter adjustment.

WARNING!

Keep the area near the appliance clear and free from combustible materials, Gasoline and other flammable vapors and liquids.

2. STANDING PILOT OPERATION

Hearth & Home Technologies recommends you leave the pilot on year round.

a.Lighting the Appliance During Regular Use Turn the wall switch to “ON”.

b.Shutdown During Regular Use Turn the wall switch to “OFF”.

c.If you decide to shut down the appliance for a long period of time:

1)Turn all wall switches to “OFF” (if applicable).

2)Turn pilot knob on valve to “OFF”.

3)Turn the gas line valve to “CLOSED”.

4)To relight the appliance, see page 19.

33606 Rev D

20

01-03

Image 20
Contents Installation & Operating Instructions Please retain this manual for future reference Appliance Specifications Glass CERTIFICATIONS/SPECIFICATIONSS. and Canada Certification Local CodesBuilders Choice Series Installation Instructions Catalog # Description NomenclatureBuilders Choice Nomenclature Clearances Location and ClearancesAppliance Locations and Space Requirements Framing Setting the ApplianceWear gloves and safety glasses for protection Installing the Interior Wall Shield VentingHorizontal Termination TerminationNo Elbows Rear Vented Appliances 45 ElbowOne 45 Elbow Two Elbows Two Elbows Three Elbows One Elbow HorizontalDimension Descriptions Termination Cap LocationsVertical Termination ClearancesVent Clearances Vent Lengths Vent SupportChimney Height Chase/Termination Installation Firestop Spacer/Chimney InstallationInstalling the Firestop Spacer Roof Pitch Min. Ft Assembling Minimum Installations MI Sections Assembling Vent SectionsAttaching the Venting to the Appliance Assembling Vent SectionsAssembling Slip Sections Disassembling Vent Sections only if NecessaryUtilities GAS Line ConnectionGAS Pressure GAS ConversionsWiring Junction BOX Installation and WiringWall Switch Standing Pilot Ignition Wiring DiagramFinishing Glass and Screen Replacement Appliance PreparationLOG SET Placing the Vermiculite and Lava RockLighting Instructions Do not light by handStanding Pilot Operation Seasonal ChecklistPrior to Operation Fuel Conversion START-UP IssuesMaintenance Instructions Glass Cleaning Cleaning the GlassLOG REMOVAL/REPLACEMENT Optional Components Fan KitReplacement Parts BCDV36 Gas Log AssemblyHOMEOWNER’S Notes HOMEOWNER’S Notes Index Limited Lifetime Warranty Year Limited WarrantyHow to Obtain Service Conditions, Exclusions, & Limitations of Liability