Delta 40, F-25, 35, 30, 45 warranty Operating Restrictions

Page 9

Product & Safety Information

OPERATING RESTRICTIONS

•Maximum working pressure for inner (domestic water) tank is 150 psig.

•Maximum working pressure for outer (primary water) tank is 45 psig.

•Inner tank has factory installed Temperature & Pressure Relief Valve with an AGA rating of 100,000 Btu/hr for PG-25 and 200,000 Btu/hr for PG- 30/35/40/45.

•Outer tank has a factory installed 30 psig relief valve rated at 535,000 Btu/hr

•Electrical rating:120 V, 60 Hz, less than 12 amperes

•pH & chloride limits for the ELITE are:

-Chloride, less than 80 mg/l.

-pH, 6.0 - 8.0.

NOTICE

Any water conditioning system must be installed and maintained in accordance with manufacturer’s specifications.

•180º Maximum operating temperature - primary side.

•120º Maximum outlet/mixed tempera- ture - domestic side.

CODE RESTRICTIONS

Single wall heat exchanger in the ELITE complies with National Standard Plumbing Code, provided that:

-Outer tank water (including additives) is practically non-toxic, having toxicity rating or Class of 1, as listed in Clinical Toxicology of Commercial Products,

-Outer tank pressure is limited to maxi- mum 30 psig by approved relief valve.

Single wall heat exchangers are permitted under the Uniform Plumbing code - Paragraph L3.2. if they satisfy all of the following requirements.

1.The heat transfer medium is potable water or contains only substances which are recognized as safe by the U.S. Food and Drug Administration.

2.The pressure of the heat transfer medium is maintained less than the normal mini- mum operating pressure of the potable water system

3.The equipment is permanently labeled to indicate that only additives recog- nized as safe by the FDAshall be used in the heat transfer medium.

Or, per Uniform Plumbing Code paragraph L3.3 as follows:

Other heat exchanger designs may be permitted where approved by the Administrative Authority.

4

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For Your Safety Installation a N D M a I N T E N a N C ETable of Contents Section V Primary Piping Section Viii Internal Wiring Section Xiii CHECK-OUT Procedures Product & Safety Information HOT Troubleshooting Ing label when inquiring about service orBer and the serial number from the rat Triangle Tube accepts no liability for anyOperating Restrictions Boiler Replacement Section I Pre-Installation ItemsCode Compliance Determining Product LocationResidential Garage Installations Section II Providing Air for Combustion and Ventilation Removal of an Existing Boiler from a Common Vent System Section III Unit Preparation Hydrostatic Test ProceduresHandling Instructions Hydrostatic Pressure TestCompletion of Hydrostatic Test and Draining Section IV Domestic Piping Temperature / Pressure Relief ValveGeneral Piping Requirements Domestic Supply PressureDomestic Piping Storage Tank Application Multiple Units InstallationTR/SMART Series Application Domestic Piping DiagramsElite With Recirculation Elite with Storage Tank Domestic PipingSection V Primary Piping Closet Zero Clearance Applications Sizing Primary PipingSystem Piping Zone Circulators Primary Piping Near Appliance Piping Install balancing valves to Primary Piping Low Temperature Radiant System Primary Piping Multi Units Installation Repair any damaged chimney mor- tar or joints Section VI VentingOil Vent Direct Vent Applications Gas Venting -General Requirements Masonry and Metal ChimneysType B Vent Systems Vent Connectors Recommended Gas Supply Piping Section VII Fuel PipingNatural Gas Supply Pressure Requirements Pipe Sizing Natural GasPipe Sizing Propane Gas Propane Gas Supply Pressure RequirementsGeneral Oil Piping Guidelines Elite Factory Internal Wiring Section Viii Internal WiringWire Color Code Installation Compliance Section IX External WiringOutdoor Temperature Limit Line Voltage ConnectionsMultiple Zone Field Wiring Using Zone Valves Field wiring with zone circulators Typical Zone Relay Panel Wiring Section X Start Up Preparation Filling the Outer Primary Tank and System Check Low Water Cut-Off Device Section XI Start-Up Procedures Final Checks Before Start-upElite Start-up Recommended Combustion Levels Recommended Primary Thermostat Setting Section XII Temperature LimitsTemperature Limits Section XIII- Check-Out Procedures Section XIV Installation Record Section Xvii Replacement Parts Jacket Components Control Panel Components Electrical Panel Components Specifications Elite Data Maxi-flo Pool and Spa Heat Exchangers TTP Brazed Plate Heat Exchangers

45, 30, 35, 40, F-25 specifications

Delta 40, F-25, F-30, F-35, and F-45 represent a new generation of aircraft designed to meet the evolving demands of modern aviation. These aircraft are equipped with advanced technologies, making them suitable for various missions, including cargo transport, surveillance, and multirole combat operations. Each model in this series comes with its own set of features and capabilities.

The Delta 40 stands as a versatile platform known for its impressive range and payload capacity. Its advanced avionics system ensures enhanced situational awareness and operational efficiency. The aircraft employs composite materials for improved fuel efficiency and reduced maintenance costs. Furthermore, Delta 40 is equipped with state-of-the-art navigation systems that include GPS, inertial navigation, and terrain awareness features.

The F-25 is designed with a focus on agility and speed. It features advanced thrust vectoring technology that allows for greater maneuverability, making it effective in air-to-air combat situations. The aircraft leverages stealth technology, incorporating radar-absorbing materials that reduce its visibility to enemy radar systems. This model also includes advanced electronic warfare capabilities for defensive operations.

Moving on to the F-30, this aircraft serves as a heavy-lift solution, optimized for cargo transport. Its spacious cargo bay can accommodate a wide range of freight, and its loading ramp facilitates quick turnaround times for ground operations. The F-30 utilizes a fly-by-wire control system to enhance stability and control during flight. Additionally, this model is equipped with advanced communication systems that allow for seamless integration into joint operations.

The F-35 integrates cutting-edge technologies to provide multirole capabilities. It boasts an advanced sensor suite that enables real-time data sharing among allied forces. The aircraft's stealth capabilities and advanced electronic warfare systems make it a formidable presence on the battlefield. Its interoperability with various platforms enhances the overall effectiveness of joint missions.

Finally, the F-45 combines the best features of its predecessors and introduces several enhancements. It leverages artificial intelligence for mission planning and execution, streamlining complex operations. The aircraft is also equipped with the latest in propulsion technology, resulting in improved fuel efficiency and performance at high altitudes.

Each of these aircraft models is designed with specific missions in mind, showcasing a commitment to innovation and technological advancement in aviation. With features that enhance their performance, adaptability, and combat readiness, the Delta 40, F-25, F-30, F-35, and F-45 represent the future of aviation technology. Their development signifies an important step toward maintaining technological superiority in both military and commercial aviation sectors.
Top Page Image Contents