STEP 5. INSTALLING THE CUSTOM PANEL
5 | 9 Kg |
4 |
|
3 |
|
2 |
|
1 | 3 Kg |
3
8
1.Install the supplied rubber skirt by inserting it into the 3 holes at the bottom of the door.
2.Install the custom panel prepared in STEP 3 to the door of the product.
1)Push part 2 assembled in STEP 4 into the hole at the top of the door as shown in the fi gure.
2)Press the custom panel downward to fi x it to the door.
3)Adjust the spring level by turning the screw according to the weight of the custom panel referring to the following table.
The spring level according to the weight of the custom panel
Level | Recommended limit of additional weight (kg) |
|
|
Level 1 | |
|
|
Level 2 | |
|
|
Level 3 | |
Level 4 | |
|
|
Level 5 | |
|
|
03 INSTALLING
Installing your dishwasher _15