Installing your dishwasher
3.Cut the rubber skirt installed in the previous step with a cutting knife as shown so that it is aligned with the front of the product. (Represented as a dashed line.)
7
7
7
7 
4.Open the door that has been assembled with the custom panel and remove the 2 screws that you fastened previously.
Since the door might strongly open or close unexpectedly when you open the door if the spring CAUTION level is not adjusted appropriately, take care that you do not injure yourself.
5.Assemble the custom panel and the door by fastening the 4 supplied screws 7 .
16_ Installing your dishwasher