Desa FLAME-MAX VintageOak Product Identification, Optional Remote Control Accessories, Unpacking

4

PRODUCT IDENTIFICATION

OPTIONAL REMOTE CONTROL ACCESSORIES LOCAL CODES

UNPACKING

PRODUCT IDENTIFICATION

Flame-Max®Golden Oak Logs

Five Piece Log Set (One-Piece Log Set for 36" Models)

Piezo Ignitor

Burner Assembly

Control Knob

OPTIONAL REMOTE CONTROL ACCESSORIES

There are four optional remote controls that can be purchased separately for Remote-Ready Models Only:

•	wall switch	•	hand-held ON/OFF remote
•	wall thermostat	•	hand-held thermostat remote.

See Accessories, page 31.

The wall thermostat or hand-held thermostat may not be used where vented decorative listing is required.

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.

Optional

Remote

Control

Piezo Ignitor

Five Piece Log Set (One-Piece Log Set for 36" Models)

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

Note: Where listed vented decorative logs are required, thermostat operation is not permitted.

Optional Selector Switch

Base Assembly

Flame Adjustment Knob

Control Knob

UNPACKING

Flame-Max®Vintage Oak Logs

Burner	Two Piece
	Log Set

Piezo Ignitor

Burner Assembly

Control Knob

Figure 1 - Product Identification

CAUTION: Do not remove the data plates from the grate assembly. The data plates contain important warranty and safety information.

1.Remove logs and heater base assembly from carton. Note: Do not pick up heater base assembly by burners. This could dam- age heater. Always handle base assembly by grate.

2.Remove all protective packaging applied to logs and heater for shipment.

3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought heater.

For..com

110399-01B