Desa CGP11A installation manual Inspecting Burner, Burner Flame Pattern

Page 20

20

INSPECTING BURNER

Continued

BURNER FLAME PATTERN

Figure 21 shows a correct burner flame pattern. Figure 22 shows an incorrect burner flame pattern.

Figure 21 - Correct Burner Flame Pattern

Figure 22 - Incorrect Burner Flame Pattern

If burner flame pattern is incorrect, as shown in Figure 22

•turn heater off (see To Turn Off Gas to Appliance, page 19)

•see Troubleshooting, pages 21 through 24

100846

Image 20

Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information Safety Device ProductLocal Codes UnpackingFresh AIR For CombustionVentilation Producing Adequate VentilationDetermining if You Have a Confined or Unconfined Space Fresh AIRDetermining FRESH-AIR Flow for Heater Location Ventilation Air From Inside Building Fresh AIR for Combustion and VentilationVentilation AIR Ventilation AIR Ventilation Air From OutdoorsInstalling To Wall Installation ItemsCheck GAS Type Locating HeaterInstalling Heater to Wall Marking Screw LocationsInstalling Two Mounting Screws Folding AnchorPlacing Heater On Mounting Screws Connecting To GAS Qualified service person must connect heater to gas supplySupply Follow all local codesPressure Testing GAS Supply Piping System Checking GASConnections Servicing. Correct all leaks at oncePressure Testing Heater GAS Connections CheckingFor Your Safety Read Before Lighting Operating HeaterPilot To Select Heating Level Heater InspectingBurner Pilot Flame PatternInspecting Burner Burner Flame PatternCabinet Trouble ShootingODS/PILOT and Burner Orifice See Cleaning TROUBLE- ShootingMaintenance, Top Technical ServiceIng statement at Service Replacement PartsParts Under Warranty Parts Not Under WarrantyValve GA5010 Service Publications AccessoryParts Centrals Parts List Illustrated Parts BreakdownWarranty Information Keep this Warranty