Desa VN1800ITA, VN1800D, VN2550ITA Shutting Off Heater, Shutting Off Burner Only pilot stays lit

Page 20

OPERATING HEATER

Models VN1800ITA and VN2550ITA

Continued

20

TO TURN OFF GAS TO APPLIANCE

Shutting Off Heater

1. Turn thermostat control knob clockwise Clockwise to the OFF position.

2. Turn off all electric power to the appliance if service is to be performed.

Shutting Off Burner Only (pilot stays lit)

1. Turn thermostat control knob clockwise Clockwise to the PILOT position.

THERMOSTAT OPERATION

(Models VN1800ITA and VN2550ITA Only)

Since the thermostat measures the temperature of air near the heater cabinet, this may not always agree with room temperature (depending on housing construction, installation location, room size, open air temperatures, etc.). Frequent operation of your heater will enable you to determine your own comfort levels.

MANUAL LIGHTING PROCEDURE

1.Follow steps 1 through 5 under Lighting Instructions, page 18.

2.With thermostat control knob pressed in, strike match. Hold match to pilot until pilot lights.

3.Keep thermostat control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

101822

Image 20
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information Combustion and Ventilation, pages 5 through Identification Local Codes Unpacking Product FeaturesProduct Fresh AIR For CombustionVentilation Producing Adequate VentilationDetermining if You Have a Confined or Unconfined Space Fresh AIR for Combustion and VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Ventilation Air from OutdoorsInstalling To Wall Installation ItemsCheck GAS Type Locating HeaterThermostat Sensing Bulb Models VN1800ITA and VN2550ITA OnlyLocating Thermostat Sensing Bulb Attaching Thermostat Sensing BulbInstalling Heater to Wall Mounting BracketRemoving Front Panel Of Heater Methods For Attaching Mounting Bracket To WallMarking Screw Locations Attaching Mounting Bracket To WallInstalling Bottom Mounting Screws Placing Heater On Mounting BracketConnecting to GAS Supply Pressure Testing GAS Supply Piping System Checking GASConnections Servicing. Correct all leaks at oncePressure Testing Heater GAS Connections Checking GAS ConnectionsOperating Heater Operating Heater Lighting InstructionsHeater To Select Heating LevelShutting Off Heater Shutting Off Burner Only pilot stays litExplosion may result causing property damage, personal OperatingIf you do not follow these instructions exactly, a fire or Injury or loss of lifeModels VN1800D and VN3000D LOW MED High Inspecting Burner Pilot Flame PatternBurner Flame Pattern If burner flame pattern is incorrect, as shown in FigureCleaning and Maintenance Trouble Shooting ODS/PILOT and Burner OrificeCabinet Air PassagewaysObserved Possible Remedy Problem Cause TROUBLE- ShootingTrouble Shooting See CleaningIf you smell gas Shut off gas supplyDo not try to light any appliance Ing statement atVN1800D VN3000D Technical ServiceService Publications Hints Replacement Parts AccessoriesIllustrated Parts Breakdown Model VN1800ITAParts List Model VN2550ITA Parts List Model VN1800D Control Position Label Hardware Assembly Model VN3000D Parts List Warranty Information Keep this Warranty