Desa GWP10T, GWRN10, GWN6, GWRP10 Unpacking, Product Identification, Product Features, Local Codes

Page 3

SAFETY INFORMATION UNPACKING PRODUCT IDENTIFICATION PRODUCT FEATURES LOCAL CODES

3

SAFETY INFORMATION

Continued

4.If you smell gas

Shut off gas supply

Do not try to light any appliance

Do not touch any electrical switch; do not use any phone in your building

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

If you cannot reach your gas supplier, call the fire department

5.This heater needs fresh, outside air ventilation to run properly. This heater has an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS shuts down the heater if not enough fresh air is available. See Air for Combustion and Ventilation, pages 4 and 5.

6.Keep all air openings in the front and bottom of heater clear and free of debris. This will insure enough air for proper combustion.

7.If heater shuts off, do not relight until you provide fresh, out- side air. If heater keeps shutting off, have it serviced.

8.Do not run heater

where flammable liquids or vapors are used or stored

under dusty conditions

9.Before using furniture polish, wax, carpet cleaner, or similar products, turn heater off. If heated, the vapors from these prod- ucts may create a white powder residue within burner box or on adjacent walls or furniture.

10.Do not use heater if any part has been under water. Immedi- ately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

11.Turn off heater and let cool before servicing. Only a qualified service person should service and repair heater.

12.Operating heater above elevations of 4,500 feet could cause pilot outage.

13.To prevent performance problems, do not use propane/LP fuel tank of less than 100 lbs. capacity.

UNPACKING

1.Remove heater from carton.

2.Remove all protective packaging applied to heater for shipment.

3.Check heater for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

PRODUCT IDENTIFICATION

Piezo Ignitor

Piezo Ignitor

Button

Control Knob

Button

Control Knob

 

 

Grill

 

Guard

 

Glass

Burners

Panel

 

Front

 

Panel

 

Heater

 

Cabinet

 

Blue Flame Heater

Infrared Heater

Figure 1 - Vent-Free Gas Heater

 

PRODUCT FEATURES

SAFETY DEVICE

This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for vent- free room heaters. The ODS/pilot shuts off the heater if there is not enough fresh air.

PIEZO IGNITION SYSTEM

This heater has a piezo ignitor. This system requires no matches, batteries, or other sources to light heater.

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of National Fuel Gas Code ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

For more information, visit www.desatech.com

107902-01D

Image 3
Contents GWN6, GWP6 GWN10T, GWP10T GWRN10 and GWRP10What to do if YOU Smell GAS Safety Information Table of ContentsLocal Codes Product FeaturesUnpacking Product IdentificationAIR for Combustion and Ventilation Providing Adequate VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Locating Heater InstallationInstallation Items Check GAS TypePlacing Heater On Mounting Screws Installing Heater to WallInstalling Two Mounting Screws Marking Screw LocationsConnecting to GAS Supply Installing Bottom Mounting ScrewRemoving Front Panel Of Heater Checking GAS Connections Pressure Testing Gas Supply Piping SystemReplace front panel Pressure Testing Heater Gas ConnectionsLighting Instructions Operating HeaterShutting Off Burner Only pilot stays lit Manual Lighting ProcedureTo Turn OFF GAS To Appliance Shutting Off HeaterBurner Patterns To Select Heating LevelThermostat Control Operation Burner Flame Pattern Infrared Models Inspecting BurnerPilot Flame Pattern Burner Flame Pattern Blue Flame ModelsCabinet Cleaning MaintenanceCleaning Burner Pilot AIR Inlet Hole ODS/PILOT and Burner OrificeObserved Problem Possible Cause Remedy TroubleshootingMaintenance, Gas leak. See Warning statement at GWP6 GWN6 GWP10 GWN10 Pilot Illustrated Parts BreakdownKEY Part Number for GWP6 GWN6 GWP10 GWN10 Description QTY Parts ListGWRP10 GWRN10 KEY Part Number GWRP10 GWRN10 Description QTY GWP10T GWN10T Pilot KEY Part Number GWP10T GWN10T Description QTY GWP6 GWP10 GWRP10 GWP10T SpecificationsService Publications Accessory Replacement PartsService Hints Technical ServiceBaltimore Electric Parts CentralsOwners Registration Form Postage Required 107902-01D Warranty Information

GWN10T, GWP10T, GWRN10, GWN6, GWP6 specifications

Desa GWN10, GWP10, GWRP10, GWP6, and GWN6 are innovative products designed to meet diverse demands in various sectors. Each model brings unique features and characteristics, tailored for specific applications in the world of technology and daily use.

Desa GWN10 is recognized for its robust design and energy efficiency. It employs advanced wireless communication technology, enabling seamless integration with smart home systems. The GWN10 stands out with its high performance in terms of connectivity range and reliability. It offers users the convenience of remote monitoring and control, making it ideal for residential and commercial use, especially in areas that require a secure and efficient energy solution.

GWP10, on the other hand, is engineered for flexibility and versatility. Its modular design allows users to configure the system according to their specific needs. The GWP10 utilizes cutting-edge battery technology, providing longer usage times and faster charging capabilities. With its user-friendly interface and cloud connectivity, users can easily track energy consumption and optimize settings for enhanced performance.

The GWRP10 is a game-changer in renewable energy applications. Equipped with advanced solar integration technologies, it can harness solar power effectively, making it an eco-friendly choice. The GWRP10 features intelligent energy management systems that optimize power distribution, ensuring that energy is used efficiently. This model is perfect for users looking to reduce their carbon footprint while enjoying reliable power supply.

GWP6, a compact powerhouse, offers exceptional performance in a smaller footprint. Its lightweight construction and easy installation make it suitable for urban environments where space is a premium. The GWP6 leverages latest communication standards, such as IoT connectivity, providing real-time data insights for users. This makes it ideal for mobile applications and temporary installations.

Finally, the GWN6 emphasizes portability and ease of use. With its rugged design, it is perfect for outdoor activities and off-grid solutions. The GWN6 includes battery backup options, ensuring uninterrupted power during outdoor adventures. Its durable build and waterproof features make it reliable for challenging environments.

Together, these models showcase Desa’s commitment to innovation, sustainability, and user-centric design. Whether for energy management, renewable energy integration, or portable power, Desa GWN10, GWP10, GWRP10, GWP6, and GWN6 provide advanced solutions for contemporary needs. Their groundbreaking technologies and features are setting new standards in their respective categories, making them valuable assets for both everyday consumers and businesses alike.