Napco Security Technologies WI1501A Testing the System, Restore the wireless point close the loop

Page 10

Testing the System

Page 10

WI1501A 9/06

TESTING THE SYSTEM

 

After installation is completed, test the system as follows.

 

1.Call the central station to inform them of the test.

2.Initiate an alarm, preferably on a zone that activates a steady siren, and verify proper signalling.

3.Call the central station to confirm their receipt of a good transmission.

Note: Be sure to test all enabled Touchpad panics.

Signal Strength Testing/Wireless Systems

To test the operation of wireless transmitters, proceed as follows.

1.

Enter the Fault-Findmode. (See Touchpad Menu Mode in WI1502. Panel must be disarmed).

2.

Fault a point of the transmitter to be tested by opening the loop. If the signal strength of the

transmitter is 3 or greater, the Touchpad will beep, as follows:

 

 

 

 

 

 

 

Signal Power

Beeps

 

 

0-2

0

 

 

 

3

1

 

 

 

4-5

2

 

 

 

6-7

3

 

 

 

8-10

4

 

3.

Restore the wireless point (close the loop).

The transmitter signal strength will be displayed on a scale of 3-10 with 3 considered marginal and 10 considered excellent. Note that if the signal strength is less than 3, the Touchpad will not beep and the strength will not be displayed. Except in the Fault-Findmode, signal strengths less than 3 will be entered into the system log. Upon zone restore, the Touchpad will beep once.

Freedom F-64 Installation Instructions

L NAPCO Security Systems

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Freedom F NapcoImportant Notice Table of Contents Introduction Page WI1501A 9/06Specifications WI1501A 9/06 5 Ordering Information System ComponentsWI1501A 9/06 7  Summary of UL RequirementsWheelock AH-12WP Installation Control PanelWiring WI1501A 9/06 9 Testing the System Restore the wireless point close the loopAuxiliary Power Wiring ConnectionsSIREN/BELL Power TransformerRemote BUS Earth GroundBasic Zone Configuration EZ Zone Doublingtm ConfigurationWire Smoke Detectors Wire Smoke Detector WiringTelephone Lines WI1501A 9/06 15 Keypad / Touchpad Messages Keypad / Touchpad MessagesGlossary AC Failure AC-Fail Report DelayWI1501A 9/06 17  Ambush Touchpad Ambush Ambush Codes Enable Global Ambush Alarm OutputsAreas Zone Area 1-Zone Area 4 Priority Area Arming Battery Auto Status DisableBackup Report on Telco 1/Telco WI1501A 9/06 19 Chirp Output on Keyfob Arm/Disarm Chime ZoneCold Start Data Format WI1501A 9/06 21 Date/Time Dealer Security Code Dial-Tone Detection Disable Auto Dial-Tone DetectionDigital Dialer Report Enter/Exit Test Mode Digital Dialer TestWI1501A 9/06 23  Enable TCP/IP Communications Enable CP-01 LimitsEasy Exit WI1501A 9/06 25  GEM-Print Keyfob Arm/Disarm chirp of Alarm OutputFire Verification Not for use in California Keyfob Control of Relay Groups 1WI1501A 9/06 27  Page 28WI1501A 9/06 WI1501A 9/06 29  Page 30WI1501A 9/06 WI1501A 9/06 31  Sound Alarm On Exit ErrorSuppress Bypass Icon When Armed Subscriber ID Numbers Account NumberTest Timer Cancel Next Test Timer Report on Any Report Wire, 4-Wire Smoke Detectors See Smoke Detectors Hour ZoneTimeout WI1501A 9/06 33  Zone Directory Trouble on Open Trouble on Short Not for UL installationsTrouble Fire Trouble Zone Area 1-4 See AreasWI1501A 9/06 35  Zone StatusAlarm current drawn in alarm STANDBY-BATTERY Calculation WorksheetStandby Time in Hours Box Standby Time1 Wiring Legend WI1501A 9/06 37 Programming Address LocationWI1501A 9/06 39  Factory Default Description Out of Box Panel OperationWI1501A 9/06 41  Out of Box Panel Operation Prior to CP-01 ChangesFCC Statement Freedom F-64 Wiring Diagram WI1501A 9/06 43 Napco Limited Warranty

WI1501A specifications

Napco Security Technologies has long been a trusted name in the security industry, and their WI1501A model is no exception. This advanced wireless intrusion detection and communication solution is engineered to offer exceptional performance, reliability, and versatility, making it a popular choice for both residential and commercial applications.

One of the standout features of the Napco WI1501A is its innovative wireless technology. The unit operates on a robust 433 MHz frequency, ensuring a stable connection with minimal interference from other devices. This frequency allows the WI1501A to cover a significant range, providing flexibility in installation without the constraint of wired connections. Its wireless capability simplifies the installation process, allowing for quick setup and repositioning if necessary.

The WI1501A is equipped with advanced motion detection technology. It utilizes passive infrared (PIR) sensors to accurately detect movement within its monitored area. These sensors are designed to minimize false alarms, ensuring that users are only alerted when genuine activity is identified. This feature is particularly valuable in environments with pets or fluctuating temperature conditions, as the sensors can distinguish between legitimate threats and non-threatening movements.

Another essential aspect of the WI1501A is its integration capabilities. It seamlessly integrates with Napco's central monitoring systems and can be customized to work with various other security components. This interoperability allows users to expand their security systems without worrying about compatibility issues.

Durability is also a key characteristic of the Napco WI1501A. Designed to withstand different environmental conditions, the unit is suitable for both indoor and outdoor installations. Its robust housing protects it from dust and moisture, ensuring long-lasting performance even in challenging settings.

The WI1501A boasts a user-friendly interface and is compatible with smartphone applications, enabling users to monitor their security systems remotely. Customizable settings allow users to tailor the system to their specific needs, whether they require immediate alerts or scheduled monitoring.

In conclusion, Napco Security Technologies' WI1501A is a versatile, reliable, and technologically advanced security solution. With its wireless technology, advanced motion detection, integration capabilities, durability, and user-friendly features, it represents a compelling option for anyone looking to enhance their security measures.
Top Page Image Contents