Monessen Hearth WDV500 Flame Height Setting for Thermostatic Mode, Speed Blower Control Optional

Page 34

WDV Series Gas Fireplace

REMOTE CONTROL OPERATION

 

 

Flame Height Setting for Thermostatic Mode

Figure 43

1.Hold AUTO button for five (5) seconds and one number and flame icon will appear in LCD screen.

2.Use the ON / ▲ or OFF / ▼ button to set the desired flame height to 1 (min.) 2 (medium) or 3 (max.).

3. If there is no input within three (3) seconds, the new setting will be transmitted to the receiver. This setting only affects auto mode operation.

4. The default setting for transmitter is 2 (medium).

FP2147

Figure 43 -

Flame Height Setting Display

3-Speed Blower Control (Optional)

Figure 44

NOTE: Blower works automatically with flame.

1.Press FAN button once to enter blower speed setup mode at low speed initially and one of the three blade icons will display darken on LCD display. Figure 53

2.Continue to press FAN button to set up the blower speed you desire.

3.If there is no input within three (3) seconds, the new setting will be transmitted to receiver. If the fireplace is on, the blower speed will take effect right away; if the fire- place is off, the receiver will remember this setting and blower is still off.

4.If you continue to press FAN button to the position that all blades are gone, the FAN icon will disappear and turn the blower off.

Blower On Delay Time and OFF Delay Time Setting (Default 5 ON / 8 OFF)

Figure 45

1.Hold FAN button for three (3) seconds and two (2) numbers will appear in the LCD screen. The upper one is ON Delay Time and the bottom is OFF Delay Time in min- utes.

2.Use the ON / ▲ button to set the desired On Delay Time from 0 to 15 minutes.

3.Use the OFF / ▼ button to set the desired Off Delay Time from 0 to 15 minutes.

°F

FP2145

Figure 44 -

3 Speed Blower Control

FP2146

Figure 45 -

Blower Delay Timer Display

3-Level Light Brightness Control

Figure 46

1.Press LIGHT button once to change light brightness to low and one of the three levels will display dark on LCD.

2.Continue to press LIGHT button to set up the light brightness you desire.

3.If there is no input within three (3) seconds, the new setting will be transmitted to the receiver.

4.If you continue to press LIGHT button, the LIGHT icon will disappear and turn the light off.

°F

FP2148

Figure 46 -

Light Brightness Display

34

78D0011

Page 33 Page 35
Image 34
Page 33 Page 35
Contents WDV Wideview Direct Vent Gas Fireplace Signature Command System Operating InstructionsInstaller Important Safety InformationOwner Gas wells. This gas is commonly known Code ApprovalNever connect unit to private non-utility As wellhead gasProduct features and code approval High ElevationsFireplace & Framing Dimensions Fireplace and Framing DimensionsFireplace Location PRE-INSTALLATION InformationCold Climate Insulation Mantel clearances ClearancesClearances to combustibles Side ViewFinishing Material Never install combustible materials overSecure Fireplace to floor or framing Front face of fireplaceVoid the warranty Venting Installation InformationInstallation precautions Failure to follow these instructions willInstalling a vent system in an outside chase Vent installationInstallation planning For horizontal terminationFor horizontal termination Inside Corner Detail Venting installationAir Supply Inlet Area Where Terminals Not Permitted Minimum distancesVenting installation How To Use The Vent GraphVERTICAL/Horizontal termination configurations Maximum Three 3 90 Elbows Per InstallationBelow Grade Installations WallClearance of at least 4 must be Vertical through-the-roof applicationsDo not back fill around snorkel Maintained between the snorkelVenting installation Installation for vertical termination Flat ceiling installationTermination Heights for Vents Above Flat or Sloped Roofs Flex Vent Installation Flex Vent Installation Installation items needed Fireplace installationInstalling gas piping to fireplace location Check gas typeNatural Gas Propane/LPDo not use open flame to check for gas leaks Electrical WiringImproper and dangerous operation Command Center Wall Installation Caut NIO AW RNI GNWiring to junction box Signature command Optional fan blower systemOptional Fan/Blower System Blotbldvsc Light Installation Glass removal & light placementGlass Frame Removal Stone & Glass Placement Stone & glass placementGlass only Placement Signature command Operating Instructions What to do if YOU Smell GASSwitch Box OPERATing InstructionsFeatures Battery InstallationKey Combinations for System Settings Signature Command System Operation InstructionsSystem CONFIGURATION/SETUP Function Operation Default SettingSelf Diagnostics Chart Command Center FUNCTIONS/OPERATIONCommand Center Operations Fault LeD IndicationRemote Control Operation Remote Transmitter OperationsSpeed Blower Control Optional Flame Height Setting for Thermostatic ModeLevel Light Brightness Control ON/OFF AUX Control Optional Remote Control OperationLow Battery Detection Child-Proof ProtectionCleaning and maintenance Burner, Pilot and Control CompartmentGlass Door Vent SysteMStones Troubleshooting Signature Command SystemAccessories / Field Installed Options Replacement PartsFirebox components and accessories Description Qty WDV500Replacement Parts Replacement Parts LP to Natural GasVent components Current Old Simpson Duravent Vent Components for 5 XOr Mhsc Selkirk Box Description Stones WDV Series Gas Fireplace Massachusetts Manufacturer RequirementsBasic Warranty Lifetime WarrantyFive Year Warranty If Warranty Service is NeededMhsc Model

WDV500 specifications

The Monessen Hearth WDV500 is a stylish and efficient direct vent gas fireplace designed to enhance any living space. This fireplace combines modern aesthetics with advanced technology to create a cozy atmosphere while ensuring optimal performance. With its sleek design and versatile installation options, it caters to various home styles, making it an ideal choice for homeowners looking to elevate their ambiance.

One of the standout features of the WDV500 is its direct vent system, which allows for safe and efficient operation. This system utilizes outside air for combustion, ensuring that indoor air quality is maintained. By drawing air from the outside and venting exhaust gases directly outside, the WDV500 minimizes heat loss and maximizes energy efficiency. This makes it an environmentally friendly option, aligning with contemporary sustainability practices.

The Monessen Hearth WDV500 is equipped with a variety of innovative technologies aimed at providing users with ease of use and improved functionality. The adjustable flame control allows homeowners to customize the intensity of the fire to suit their mood or occasion. Additionally, the WDV500 features a high-efficiency burner that generates an impressive heat output, ensuring that rooms are kept warm and inviting even during the coldest months.

In terms of design, the WDV500 offers multiple finish options and accessory features, allowing it to seamlessly blend into any decor. A stunning selection of logs, crystals, or stones enhances the visual appeal of the fireplace, giving it a contemporary touch that complements traditional or modern interiors alike.

Safety is a priority with the Monessen Hearth WDV500, which includes an automatic shut-off feature that engages if the unit experiences overheating, ensuring peace of mind for users. The fireplace's straightforward installation process further emphasizes its user-friendly design, suitable for both new builds and retrofitting into existing spaces.

Overall, the Monessen Hearth WDV500 represents a harmonious blend of technology, safety, and style. Whether for relaxation on chilly evenings or for entertaining guests, this versatile fireplace provides warmth and elegance, making it a perfect addition to any home. Its efficient performance, customizable features, and aesthetic appeal make the WDV500 a popular choice among discerning homeowners.
Top Page Image Contents