Location and Clearances

The fireplace is shipped with a set-up face that is 1/8" larger on the top, bottom and each side than the faceplate. Leave the set-up face in place to act as a tem- plate when installing the finishing face.

Do not build shelves or cupboards into the area above the fireplace.

Note: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the fireplace body, it is recommended that the walls of the fireplace enclosure be “finished” (ie: drywall/sheetrock), as you would finish any other outside wall of a home. This will ensure that clear- ance to combustibles is maintained within the cavity.

Objects placed in front of the fireplace must be kept a minimum of 48" away from the front face of the unit.

IMPORTANT

This unit, fully dressed, weighs 850 lbs (385.6kg)

Ensure there is adequate floor support for the unit, chimney and facing material. Some ma- terial could weigh thousands of pounds.

MAINTAIN THESE MINIMUM CLEARANCES TO

COMBUSTIBLES:

Framed enclosure
Rear	-	0" to stand-offs (rear)
Sides	-	6" to sides*
Ceiling	-	120" from the base of the unit
(enclosure)		(unless shielded with metal studs
		and cement board).
Ceiling	-	84" from the base of the unit
(in front of fireplace)
Chimney	-	2" (follow manufacturers instructions)
	-	1"

Hot Air Gravity Ductwork Insulation

This enclosure must provide greater clearance if air intake vents are run vertical along side the fireplace.

SOLID PACK CHIMNEY

Ceiling	- 120" from the base of the unit
(enclosure)	(unless shielded with metal studs
	and cement board).
AIR COOLED
Ceiling	- 84" from the base of the unit
(enclosure)

We recommend that the fireplace be secured to the floor in all cases.

Using the door opening as a datum, level the fireplaceby shimming under- neath the fireplace.

Remove and dis- card the lifting han- dles. Bend the tabs down and secure the unit to the floor.

The fireplace enclosure must be provided with sufficient air circulation to avoid a fire hazard. Install ventilation grilles (minimum openings of 40 sq. inches) at both floor and ceiling levels of the enclosure. These grilles must not re- strict the flow of heat by more than 25%.

Do not install into any area having a height less than 7 feet (ceiling of enclosure to fireplace bottom, excluding hearth height).

The location of windows, doors and the traffic flow in the room where the stove is to be located should be considered. If possible, you should choose a location where the chimney will pass through the house without cutting a floor or roof joist.

W415-0594 / A / 02.15.07

NZ6000 specifications

The Napoleon Fireplaces NZ6000 is a premier choice for homeowners seeking an efficient, stylish, and versatile fireplace solution. This powerful unit seamlessly blends modern technology with classic design, providing exceptional warmth and ambiance in any living space.

One of the standout features of the NZ6000 is its remarkable heating capacity. With an impressive output of up to 55,000 BTUs, it can efficiently heat areas of up to 2,500 square feet, ensuring comfort during even the coldest months. The fireplace’s design allows for a dual air-wash system, promoting a clean burn while maintaining clear views of the mesmerizing flames.

The NZ6000 is built with durability in mind, featuring a robust steel construction. Its heavy-duty build ensures that heat retention and distribution are optimized, providing long-lasting performance. Additionally, the cast iron door adds a touch of elegance while enhancing the unit's efficiency. The door's large viewing area allows for an unobstructed view of the fire, creating a warm, inviting focal point in your home.

Incorporating advanced technology, the Napoleon NZ6000 is equipped with a state-of-the-art combustion system that maximizes efficiency and minimizes emissions. This includes an innovative air supply system that enables precise control over the air intake, allowing users to adjust the burn rate to suit their preferences. This not only enhances the performance of the fireplace but also ensures compliance with modern environmental standards.

Another attractive feature is the customizable design options available for the NZ6000. Consumers can choose from a variety of finishes and faceplates, allowing them to tailor the appearance to complement their home décor. The fireplace can also be paired with an array of decorative media, such as logs, stones, or crystals, giving homeowners the flexibility to create their desired aesthetic.

Safety is paramount with the NZ6000. It comes equipped with an advanced safety shut-off system, ensuring peace of mind during operation. The easy-to-use controls and user-friendly design make it accessible for everyone, from novice users to seasoned fireplace enthusiasts.

In summary, the Napoleon Fireplaces NZ6000 brings an exceptional combination of efficiency, durability, and aesthetic appeal, making it a preferred choice for anyone looking to enhance their home's warmth and ambiance. With its cutting-edge technology, customizable options, and focus on safety, the NZ6000 stands out as a top-tier investment for any modern living space.