Blower Replacement

1.Before proceeding, turn off the power to the unit.

2.Turn the pilot light off.

3.Remove the logs and place in a location where they will not be damaged.

FIGURE 41

4.Remove the 2 side

metal brick panels by re-	SCREWS
moving the two securing
screws on the front of the
panels.

FIGURE 42

REAR DOOR

SCREWS

5.Remove the 4 screws that secure the rear door and remove the door.

FIGURE 43a

SECURING BRACKET

FIGURE 43b

6.Remove the top and bottom glass securing brackets on the upper and lower portions of the glass opening and remove the glass.

SCREWS

FLAME

EFFECT

FIGURE 44

7.Remove the flame effect panel by removing the 6 screws.

FIGURE 45

FLAME GENERATOR

8.Remove the flame generator by sliding to the left and dislodging the neoprene tube from the motor shaft. Next, slide the flame generator to the right to remove the shaft from the nylon bearing.

FIGURE 46

9.Remove the two wires secured to the blower (they should slide off of the connector).

10.Remove the wing nut.

11.Remove the blower and replace with the new one.

12.Repeat steps 9 through 1 to put unit back together.

FLAME EFFECT BULB REPLACEMENT

To replace the flame effect bulbs, follow steps 1-8 of the BLOWER REPLACEMENT section above, then continue with step 9.

9.Slide the defective bulb to either side until opposite end is disengaged. Remove the bulb towards the back of the fireplace.

10.Replace with 75 watt Halogen light (E-11 Base).

Install the replacement bulb using the protective wrap to avoid touching the lense, then discard protective wrap.

11.Repeat steps 8 through1 to put the unit back together.

W415-0429 / C / 11.04.05

GE38PT-M, GE38NT-M specifications

The Napoleon Fireplaces GE38PT-M and GE38NT-M are stunning additions to the world of modern heating solutions, designed to combine aesthetics and functionality seamlessly. These fireplaces are ideal for homeowners looking for an efficient, stylish way to enhance their living spaces while providing the warmth and comfort that only a genuine fireplace can offer.

One of the standout features of the GE38PT-M and GE38NT-M is their innovative design, which emphasizes versatility and ease of installation. Both models come in a stunning panorama format, allowing for a wide viewing area that showcases the mesmerizing flames, creating a captivating focal point in any room. The clean and contemporary lines of these fireplaces make them a perfect fit for both traditional and modern interiors.

A key technology incorporated into these models is the advanced catalytic combustion system. This system not only enhances the efficiency of the fireplace but also significantly reduces emissions, making it an eco-friendly choice. The GE38PT-M is designed for propane, while the GE38NT-M operates on natural gas. Both options provide maximum efficiency with a minimum environmental footprint.

The fireplaces are equipped with intuitive control options, allowing users to easily adjust the flame height and heat output to achieve the desired ambiance and comfort level. With a built-in electronic ignition system and a convenient remote control, operating the GE38PT-M and GE38NT-M is a breeze, allowing you to set the perfect atmosphere at the touch of a button.

Additionally, these models include an array of customizable features. Homeowners can choose from a variety of decorative media, including glass beads and logs, allowing for personalization that enhances the visual appeal of the flames. The ambient lighting options also allow users to create different atmospheres, making these fireplaces a versatile choice for any occasion.

Safety is paramount in the design of the GE38PT-M and GE38NT-M. These models are equipped with a protective screen and a safety shut-off feature, ensuring peace of mind for families and pets. With their striking aesthetics, innovative technology, and safety features, the Napoleon Fireplaces GE38PT-M and GE38NT-M stand out as an exceptional choice for anyone looking to elevate their home's heating experience.