20
EMBER BED BULB REPLACEMENT
FIGURE 47 |
1.Remove the lower control panel by removing the 8 se- curing screws.
FIGURE 48 | LIGHT SOCKET |
2.Hold the lower portion of the light socket and turn clockwise to remove.
3.Pull the bulb straight out of the socket and replace the bulb being careful not to touch the quartz portion with your fingers.
4.To put back together, reinstall the control panel removed in step 1.
OPERATION
FIREPLACE OPERATION
To operate the gas features, the pilot needs to be running and the gas valve turned to the on position.
You can run the fireplace on manual or remote.
When operating the main burner on manual, the fireplace will operate on low input only.
FIGURE 49
GAS
Turn the respective main power switches to manual to operate either the gas or the electric features of the fire- place without the remote or thermostat.
Turn both the main power switches to remote to operate either the gas or the electric features of the fireplace with the remote or thermostat.
Turn both the main power switches to the off position to disable either the gas or the electric features of the fireplace.
In order to save the battery life on the remote, it is recommended that when operating the electric fireplace for an extended period of time, to operate with the electric power switch in the manual position.
FIGURE 50
HAND HELD REMOTE OPERATION
1.Turns electric flame on/off.
2.Turns gas flame on/off.
3.Activates gas flame adjustment.
4.Activates fan adjustment.
5.Adjusts options #3 & #4 up.
6.Sets the timer.
7.Adjusts options #3 & #4 down.
8.Sets the time.