Electrical Connection

This fireplace requires 6 amps, 120 volt and a 60 hz grounded circuit.

Do NOT use the fireplace if any part has been under water.

Call a qualified service technician IMMEDIATELY to have the fireplace inspected for damage to the electrical cir- cuit.

HARD WIRING CONNECTION

It is necessary to hard wire this fireplace.

Permanently framing the fireplace with an enclosure, re- quires the fireplace to be hardwired.

This fireplace must be electrically connected and grounded in accordance with local codes. In the absence of local codes, use the current CSA C22.1 CANADIAN ELECTRI- CAL CODE in Canada or the ANSI/NFPA 70-1996 NATIONAL ELECTRICAL CODE in the United States.

The plastic coating of the two electrical inlet lines are marked "H" for hot and "C" for common.

ELECTRICAL DIAGRAM LEGEND

# Part #

Description

1 . W660 - 0029 Controller

2.W707-0003 Transformer

3. W660-0034

Rocker Switch

4.W062-0005 Blower

5. W750-0117

Light Harness

6.W387-0004 5 Watt Quartz Light

7. W435-0004

12 Volt Motor

8.W350-0126 Receptical (Electrical Box)

9.W387-0003 75 Watt Quartz Bulbs

10.W725-0035 Natural Gas Valve

	W725-0034	Propane Valve
11.	W750-0122	1 pcs
12.	W750-0123	1 pcs
13.	W750-0124	1 pcs
14.	W750-0134	1 pcs
15.	W175-0010	Wire Nut

16.W750-0133 Line In Wire Harness (common)

17.W750-0133 Line In Wire Harness (hot)

18. W750-0135	1 pcs
19 . W750 - 0136	1 pcs

Electric Diagram

FIGURE 53

W415-0429 / C / 11.04.05