OPEN-END Installation Procedure

VENTING

FIGURE 22

Refer to pages 6-13. All venting must have a minimum clear- ance of 2" to combustible material on the top and 1" on the sides and bottom.

FRAMING

See Page 18 for additional framing dimensions. NOTE: In order to avoid the possibility of exposed insula- tion or vapor barrier coming in contact with the ﬁ replace body, it is recommended that the walls of the ﬁ replace enclosure be “ﬁ nished” (ie: drywall/sheetrock), as you would ﬁ nish any other outside wall of a home. This will ensure that clearance to combustibles is maintained within the cavity.

It is best to frame your ﬁreplace after it is positioned and the vent system is installed. Use 2x4's and frame to local building codes. NOTE: The one side stud must be steel.

FIGURE 20

RETAINER

DETAIL 6

STEP 6

FACING

Combustible materials may be installed ﬂ ush with the front of the ﬁ replace but must not cover any of the black face-areas of the ﬁreplace. Non-combustible material (brick, stone or ceramic tile) may protrude in these areas.

It is not necessary to install a hearth extension with this ﬁ replace system.

When roughing in the ﬁ replace, raise the ﬁ replace to accom- modate for the thickness of the ﬁnished ﬂoor materials, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower access door and the installation of many decorative ﬂ ashing accessories.

Objects placed in front of the ﬁ replace should be kept a mini- mum of 48" away from the glass front faces.

FINISHING

Refer to pages 23-26 for complete instructions regarding mantel requirements and installations, log placement, glass door and upper and lower louvre attachments. A minimum of 3" of cement board or non-combustible equivalent must be installed against the side edge of the ﬁ replace.

A = 25¼" minus ﬁ nishing material thickness each side.

NOTE: LEFT CORNER UNIT ILLUSTRATED

To install the ﬁ replace face ﬂ ush with the ﬁ nished wall, posi- tion the framework to accommodate the thickness of the ﬁ nished wall.

BRICK PANEL INSTALLATION

Install the base panels as illustrated in steps 1-4 on page 15. The side panel sits under the bracket tab. Holding the side panel in position, bend down the tab to secure. DETAIL 6.

FIGURES 21a-c

FIGURE 23

DRYWALL

NON-

COMBUSTIBLE

DRYWALL

5" MIN

STEP 5

!WARNING

Finishing must be done using a non-combustible material placed ﬂ ush with the front face of the unit and extending from the top of the unit such as cement board, ceramic tile, marble, etc. when ﬁ nishing to the ﬁ replace. DO NOT

USE WOOD OR DRYWALL. Any ﬁre rated drywall is not acceptable.

W415-0299 / J / 04.14.08

BGD40-P, BGD40-N specifications

Napoleon Fireplaces has long been a name synonymous with quality and innovation in the realm of hearth products. Among its impressive lineup, the BGD40-N and BGD40-P models stand out for their blend of performance, aesthetics, and technology, making them ideal choices for homeowners seeking both efficiency and style.

The BGD40-N is a natural gas fireplace, designed with an emphasis on creating a warm and inviting atmosphere. One of its main features is the glass front that enhances its visual appeal while providing a clear view of the mesmerizing flames. This model is equipped with Napoleon's patented PHAZER log set, which mimics the appearance of real wood, further enriching the realistic ambiance.

In contrast, the BGD40-P is a propane version of the fireplace, offering similar design aesthetics and functionality tailored to propane users. Both models boast a high-efficiency rating, which means they maximize heat output while minimizing gas consumption. This efficiency not only reduces energy costs but also makes them environmentally friendly options for home heating.

One of the standout technologies featured in the BGD40 series is the advanced electronic ignition system. This system ensures that igniting the fireplace is a hassle-free experience, even during power outages when using the optional battery backup. Furthermore, the exclusive Heat Management System provides optimal airflow and distribution of heat, ensuring that living spaces are warmed effectively and consistently.

Safety features are paramount in both models, with a built-in safety shut-off system that enhances peace of mind for users. Additionally, the adjustable flame height allows homeowners to customize their experience, ranging from a gentle glow to a roaring fire.

The design flexibility of the BGD40-N and BGD40-P allows them to fit seamlessly into various home décors, complementing both modern and traditional interiors. With their sleek lines and customizable options, including different media choices, these fireplaces serve as focal points in any room.

Installation is straightforward, with options available for both vented and direct vent configurations. This versatility means they can be installed in various locations, making them suited for new builds or retrofitting into existing structures.

In summary, Napoleon Fireplaces' BGD40-N and BGD40-P models deliver on aesthetics, efficiency, and innovative technology. With their realistic flame effects, user-friendly features, and commitment to safety, they are excellent choices for those seeking to enhance the comfort and ambiance of their homes.