Karcher 600 CD manual User Level, Technician Level, Technician password, Menu Selection

Page 34

OPERATION OF THE SYSTEM

WTC 600 LP / MP

3.4.3Starting Operation of the RO System

3.4.3.1Operating Levels and Passwords

Normal Level:

In this level, the operating mode, the operating condition as well as the current measuring and operating values are indicated on the display (5/2) with the help of changing (rotating) masks (see figure 16).

NOTE The user operates the equipment in normal level. Entering a password is not required.

User Level:

The user level enables operation as well as adjustment of the most important functions and operating settings/parameters as well as the calibration of the LF sensors.

User password:

Technician Level:

The technician level is an extended user level. Apart from the functions of the user level, it enables the manipulation of all operating settings/parameters as well as a hardware test with the help of a diagnosis function.

Technician password:

ESC

ESC

NOTE To enter a password, the respective key sequence must be entered in the normal level within one minute.

NOTE For settings and menus of the RO 1000 control system, see figure 22.

NOTE Enter the settings of the projected system in the diagram on page 64!

3.4.3.2Menu Selection

The menu consists of several lines which are arranged below each other in a list. Two menu lines each are depicted on the display of the control.

In order to call up the function of a menu point, first select the desired menu point with help of the pushbutton and the pushbutton.

By pressing the RETURN pushbutton, the function of this menu point is called up. A menu is ended by pressing the ESC pushbutton (returning you to the normal level). For nested menus, the ESC pushbutton brings you back to the previous menu.

3.4.3.3Selection of an Option

Options are selected with the pushbutton and the pushbutton. By pressing the RETURN pushbutton, the current option is stored as the new operating setting. A selection can be cancelled by pressing the ESC pushbutton.

34

Service Handbook 08.2004

Page 33 Page 35
Image 34
Page 33 Page 35
Contents LP/MP, PI Foreword ForewordContents WTC 600 LP / MPMaintenance 2.5Maintenance Plan Malfunction, Cause and Corrective ActionWTC 600 LP / MP Introduction Marking of Instructions Intended UseSafety Instructionse Handling Electricity / Protection Class General installation notesUnits and Designations Milliliter = 1 liter 1000 mg =Overview of components Service Handbook OverviewDescription Flow Diagram Pre-chlorination Module Description of the SystemModular Design Flocculation ModuleControl Panel and Display Mediafilter- and Activated Carbon FilterRO System, Pump and Fine Filter Anti Scalant and Post ChlorinationMotor Protection Switch Safety Installations Emergency StopRC Protective Switch Pressure-increase PumpMicrofuses Operating Modes Automatic Operation Standard Operating ModeManual Operation Weight in delivery condition without filter container Technical Data WTC 600 LP/MPDimensions H x W x D Parameter WTC 600 LP WTC 600 MPFilling capacities, Mediafilter Float SwitchFilter Container Filter amounts, activated carbon filterChemicals for Metering Container Cleaning Chemicals Product Item NoConsumption Materials Product ItemNoAssembly Chapter Assembly and Starting OperationStarting Operation Chapter First fill of the metering tanks Mixing Chlorine, Flocculation Agent and AntiscalantPre-chlorination Calculation example Antiscalant Flocculation Agent Mixing of the flocking test solution AuxiliariesMetering Amounts and Mixing of the Post Chlorination Work StepsPerform flocking test Auxiliaries Evaluate flocking testConnecting the Equipment Connections, Valves and IndicatorsPressure-increase Module RO Module with Preliminary FiltersPreliminary Filter Electrical Connections Pressure-increase PumpMetering Station WTC 600 LP / MP Reverse Osmosis System Starting OperationModul Lift Frequency Meter 14/1 14/4 Ing Filter Support pebbles Filter sand / Activated carbon Initial FillingMedia and Activated Carbon Filter Backwashing / RegenerationProgramming Position Indication DescriptionIndication Description Technician Level Technician passwordUser Level Menu SelectionAcknowledging Data Inputs Adjusting Operating Parameters and Balancing ValuesSelecting Several Arguments at the Same De-conservingIndication System in disinfection operating mode Initial startup Untreated Drinking water Concentrade Yield Water CapacityKeys to call up menu item 6 LF limits Normal Operation User indication in normal operationOperating Messages for Normal Operation Putting Out of Operation Desinfection Metering Station WTC 600 CD Fine FilterEvery 4 weeks Reverse Osmosis Module RO Module RO Filter ReplacementFilter replacement Replacing the membraneCleaning in Case of Malfunction Assembly and disassembly of the RO filterAids Design of the Flushing and Disinfection EquipmentStarting Position Work Steps Disinfection Acidic and Alkaline Cleaning Conserve the RO system Starting Position Drain the pre-filter Flushing the pre-filter Spare parts required Replace the activated carbon or filter sandSpare parts possibly required Disposing of the replaced filter material Malfunction, Cause and Corrective Action Indication Malfunction Cause Corrective Action ChapMalfunction Indication at the Operating Panel Indication of RO Fuse defective Have replaced by Chap./Fig Maintenance Plan Other Maintenance Maintenance Plan Service Module Work to be Carried OutRO control factory settings GWVOperating mode Switched off WTC 600 MP, MP-A, MP-AM in voltages 230 V and 400RO control program structure Appendix Manual RO 1000 ManualContents Technical Data General Remarks Scope of ApplicationSafety Instructions Instructions for UseDeclaration of Conformity Terms and DefinitionsScript Examples Start-up Function of Terminals Code Function Adm. max. load TerminalOperational Scope Operating settings Not switch offOperating parameters LIMAppendix Stop Operating conditions Denomination Reason Consequence Pressure Switch activeOperating failures/failure messages Forced Stop activeKeyboard Indicator lightsOperation User interface Text displaySelection of menu Password entryBasic elements SelectionAlphanumerical editing MultiselectionNumerical editing ConfirmationsOperating levels Technicians levelUsers Level Menu structure Main menu Menu point FunctionCalibration menu Max CySetting menu Diagnosis menuTechnical Data Min Type Max UnitOperating Record for the WTC 600 LP/MP Automatic Operation List of KEY Words Units and Designations

600 CD specifications

The Karcher 600 CD is an innovative cleaning machine designed to tackle a wide variety of dirt and grime in both professional and domestic settings. Renowned for its efficiency, versatility, and user-friendly design, this powerful equipment is particularly well-suited for cleaning large areas such as driveways, patios, and commercial spaces.

One of the standout features of the Karcher 600 CD is its robust pressure cleaning capability. It boasts a maximum pressure output that effectively removes stubborn stains, embedded dirt, and even algae with minimal effort. The adjustable pressure settings offer the flexibility needed for different surfaces, ensuring that delicate materials are not damaged while still achieving optimal cleaning results.

The Karcher 600 CD employs advanced cleaning technologies such as the patented Dual Nozzle System. This feature ensures a consistent and thorough clean by utilizing two high-pressure nozzles that work in unison. The nozzles are adjustable, allowing users to customize the spray pattern according to the task at hand. Whether it’s rinsing large surfaces or precision cleaning in tight spots, the Karcher 600 CD excels in delivering superior results.

In terms of ergonomics, the Karcher 600 CD is designed for user comfort. It features a lightweight and compact build that allows for easy maneuverability, even in hard-to-reach areas. The integrated handle and wheels enhance portability, making it effortless to transport the machine from one location to another.

Energy efficiency is another key characteristic of the Karcher 600 CD. The machine is engineered to consume less water and energy while still providing powerful cleaning performance. This eco-friendly aspect not only reduces operational costs but also aligns with sustainable cleaning practices.

Furthermore, the Karcher 600 CD comes with a range of accessories and attachments that enhance its functionality. Users can switch between different cleaning tasks seamlessly, whether it’s washing vehicles, cleaning decks, or revitalizing outdoor furniture.

The Karcher 600 CD stands out in the cleaning equipment market for its combination of power, versatility, and efficiency. With its user-centric design and advanced features, it is ideal for homeowners and professionals alike who seek effective and reliable cleaning solutions.
Top Page Image Contents