Karcher 600 CD manual Setting menu, Diagnosis menu

Page 88

APPENDIX

WTC 600 LP / MP

4.4.3Setting menu

The calibration menu is used to adjust the sensors. The following functions are available:

Menu point:

Function:

1

t Cy LIM

Numerical editing of t delay LIM

2

t Cy alarm

Numerical editing of t delay aaLIM

3

t lack of pressure

Numerical editing of t delay lack of pressure

4

t delay at start

Numerical editing of t delay at start

5

t press. availabe

Numerical editing of t pressure failure

6

t disc. rinse

Numerical editing of t rinse

7

t rinse.interval

Numerical editing of t rinse interval

8

t concentrate

Numerical editing of t concentrate

9

t disposal

Numerical editing of t disposal

10 t maintenance

Numerical editing of t maintenance

11ps failure alarm

Selection of ps acknowledgment

12 ps concentrate

Selection of ps concentrate

13 ps type of tank

Selection of ps tank type

14 inputs

Setting of input types (valve with open rest pos./opener)

15 ps language

Selection of ps language

16 system reset

As soon as this function is called-in and acknowledged,

 

 

the internal hours meter will be deleted (set to 0)

4.4.4Diagnosis menu

The diagnosis allows direct display/manipulation of the input/output conditions for testing purposes.

ATTENTION!!! Under these conditions, failure detection is not active.

Menu point:

Function:

1 digital input

Display of the current conditions of the digital inputs (see item 2.3).

 

Display is like a multiselection, but with the difference that the conditions

 

of the arguments cannot be set - they depend on the input conditions.

2 digital output

Manipulation of the digital circuit outputs (see item 2.3) by means of a

 

multiselection.

3 lights

Manipulation of the lights (item 4.1.1) by means of a multiselection.

4 Cy permeate

Permanent display of the current permeate conductivity. This display can

 

be cancelled by actuating one of the keys.

5 temp. permeate

Permanent display of the current permeate temperature. This display can

 

be cancelled by actuating one of the keys.

88

Service Handbook 08.2004

Image 88
Contents LP/MP, PI Foreword ForewordContents WTC 600 LP / MPMaintenance 2.5Maintenance Plan Malfunction, Cause and Corrective ActionWTC 600 LP / MP Introduction Marking of Instructions Intended UseSafety Instructionse General installation notes Units and DesignationsHandling Electricity / Protection Class Milliliter = 1 liter 1000 mg =Overview of components Service Handbook OverviewDescription Flow Diagram Description of the System Modular DesignPre-chlorination Module Flocculation ModuleMediafilter- and Activated Carbon Filter RO System, Pump and Fine FilterControl Panel and Display Anti Scalant and Post ChlorinationSafety Installations Emergency Stop RC Protective SwitchMotor Protection Switch Pressure-increase PumpMicrofuses Operating Modes Automatic Operation Standard Operating ModeManual Operation Technical Data WTC 600 LP/MP Dimensions H x W x DWeight in delivery condition without filter container Parameter WTC 600 LP WTC 600 MPFloat Switch Filter ContainerFilling capacities, Mediafilter Filter amounts, activated carbon filterCleaning Chemicals Product Item No Consumption MaterialsChemicals for Metering Container Product ItemNoAssembly Chapter Assembly and Starting OperationStarting Operation Chapter First fill of the metering tanks Mixing Chlorine, Flocculation Agent and AntiscalantPre-chlorination Calculation example Antiscalant Mixing of the flocking test solution Auxiliaries Metering Amounts and Mixing of the Post ChlorinationFlocculation Agent Work StepsPerform flocking test Auxiliaries Evaluate flocking testConnecting the Equipment Connections, Valves and IndicatorsPressure-increase Module RO Module with Preliminary FiltersPreliminary Filter Electrical Connections Pressure-increase PumpMetering Station WTC 600 LP / MP Reverse Osmosis System Starting OperationModul Lift Frequency Meter 14/1 14/4 Ing Initial Filling Media and Activated Carbon FilterFilter Support pebbles Filter sand / Activated carbon Backwashing / RegenerationProgramming Position Indication DescriptionIndication Description Technician password User LevelTechnician Level Menu SelectionAdjusting Operating Parameters and Balancing Values Selecting Several Arguments at the SameAcknowledging Data Inputs De-conservingIndication System in disinfection operating mode Initial startup Untreated Drinking water Concentrade Yield Water CapacityKeys to call up menu item 6 LF limits Normal Operation User indication in normal operationOperating Messages for Normal Operation Putting Out of Operation Desinfection Metering Station WTC 600 CD Fine FilterEvery 4 weeks RO Filter Replacement Filter replacementReverse Osmosis Module RO Module Replacing the membraneCleaning in Case of Malfunction Assembly and disassembly of the RO filterAids Design of the Flushing and Disinfection EquipmentStarting Position Work Steps Disinfection Acidic and Alkaline Cleaning Conserve the RO system Starting Position Drain the pre-filter Flushing the pre-filter Spare parts required Replace the activated carbon or filter sandSpare parts possibly required Disposing of the replaced filter material Malfunction, Cause and Corrective Action Indication Malfunction Cause Corrective Action ChapMalfunction Indication at the Operating Panel Indication of RO Fuse defective Have replaced by Chap./Fig Maintenance Plan Other Maintenance Maintenance Plan Service Module Work to be Carried OutRO control factory settings GWVOperating mode Switched off WTC 600 MP, MP-A, MP-AM in voltages 230 V and 400RO control program structure Appendix Manual RO 1000 ManualContents Technical Data General Remarks Scope of ApplicationSafety Instructions Instructions for UseDeclaration of Conformity Terms and DefinitionsScript Examples Start-up Function of Terminals Code Function Adm. max. load TerminalOperational Scope Operating settings Not switch offOperating parameters LIMAppendix Stop Operating conditions Pressure Switch active Operating failures/failure messagesDenomination Reason Consequence Forced Stop activeIndicator lights Operation User interfaceKeyboard Text displayPassword entry Basic elementsSelection of menu SelectionMultiselection Numerical editingAlphanumerical editing ConfirmationsOperating levels Technicians levelUsers Level Menu structure Main menu Menu point FunctionCalibration menu Max CySetting menu Diagnosis menuTechnical Data Min Type Max UnitOperating Record for the WTC 600 LP/MP Automatic Operation List of KEY Words Units and Designations

600 CD specifications

The Karcher 600 CD is an innovative cleaning machine designed to tackle a wide variety of dirt and grime in both professional and domestic settings. Renowned for its efficiency, versatility, and user-friendly design, this powerful equipment is particularly well-suited for cleaning large areas such as driveways, patios, and commercial spaces.

One of the standout features of the Karcher 600 CD is its robust pressure cleaning capability. It boasts a maximum pressure output that effectively removes stubborn stains, embedded dirt, and even algae with minimal effort. The adjustable pressure settings offer the flexibility needed for different surfaces, ensuring that delicate materials are not damaged while still achieving optimal cleaning results.

The Karcher 600 CD employs advanced cleaning technologies such as the patented Dual Nozzle System. This feature ensures a consistent and thorough clean by utilizing two high-pressure nozzles that work in unison. The nozzles are adjustable, allowing users to customize the spray pattern according to the task at hand. Whether it’s rinsing large surfaces or precision cleaning in tight spots, the Karcher 600 CD excels in delivering superior results.

In terms of ergonomics, the Karcher 600 CD is designed for user comfort. It features a lightweight and compact build that allows for easy maneuverability, even in hard-to-reach areas. The integrated handle and wheels enhance portability, making it effortless to transport the machine from one location to another.

Energy efficiency is another key characteristic of the Karcher 600 CD. The machine is engineered to consume less water and energy while still providing powerful cleaning performance. This eco-friendly aspect not only reduces operational costs but also aligns with sustainable cleaning practices.

Furthermore, the Karcher 600 CD comes with a range of accessories and attachments that enhance its functionality. Users can switch between different cleaning tasks seamlessly, whether it’s washing vehicles, cleaning decks, or revitalizing outdoor furniture.

The Karcher 600 CD stands out in the cleaning equipment market for its combination of power, versatility, and efficiency. With its user-centric design and advanced features, it is ideal for homeowners and professionals alike who seek effective and reliable cleaning solutions.