Karcher 600 CD manual Conserve the RO system

Page 50

MAINTENANCE

WTC 600 LP / MP

4.4.3.1Cleaning Solution for Acidic Cleaning

Volume of the

RM Kleen MCT 103 [l]

Item No.

cleaning solution [l]

 

 

30

 

1,0

6.294-009.0

 

 

 

 

Table 23

Composition of the cleaning solution for acidic cleaning

 

Neutralise by adding soda (6.287-014), until the pH value is approx. 7.

4.4.3.2Cleaning Solution for Alkaline Cleaning

Volume of the

RM Kleen MCT 511 [l]

 

Item No.

cleaning solution [l]

 

 

 

 

 

 

 

 

30

 

1,0

 

6.294-008.0

 

 

 

 

 

Table 24

Composition of the cleaning solutions for alkaline cleaning

 

Neutralise by adding RM Vaporapid bio descaling acid (6.290-239), until the pH value is approx. 7.

4.4.4Conserving

4.4.4.1Drain the metering station and flush

Initial situation:

- RO system switched off

Work steps:

1.Dispose of the contents of the metering stations according to the local regulations.

2.Flush the tank with drinking water.

3.Flush the metering pumps with drinking water.

4.Unscrew the metering hoses and drain.

4.4.4.2Conserve the RO system

When the RO equipment should not be used for more than 14 days, then it must be conserved.

NOTE After a maximum of 6 months, the conservation means must be flushed and renewed, if required.

50

Service Handbook 08.2004

Image 50
Contents LP/MP, PI Foreword ForewordContents WTC 600 LP / MPMaintenance 2.5Maintenance Plan Malfunction, Cause and Corrective ActionWTC 600 LP / MP Introduction Marking of Instructions Intended UseSafety Instructionse Handling Electricity / Protection Class General installation notesUnits and Designations Milliliter = 1 liter 1000 mg =Overview of components Service Handbook OverviewDescription Flow Diagram Pre-chlorination Module Description of the SystemModular Design Flocculation ModuleControl Panel and Display Mediafilter- and Activated Carbon FilterRO System, Pump and Fine Filter Anti Scalant and Post ChlorinationMotor Protection Switch Safety Installations Emergency StopRC Protective Switch Pressure-increase PumpManual Operation Operating Modes Automatic Operation Standard Operating ModeMicrofuses Weight in delivery condition without filter container Technical Data WTC 600 LP/MPDimensions H x W x D Parameter WTC 600 LP WTC 600 MPFilling capacities, Mediafilter Float SwitchFilter Container Filter amounts, activated carbon filterChemicals for Metering Container Cleaning Chemicals Product Item NoConsumption Materials Product ItemNoStarting Operation Chapter Assembly and Starting OperationAssembly Chapter Pre-chlorination Mixing Chlorine, Flocculation Agent and AntiscalantFirst fill of the metering tanks Calculation example Antiscalant Flocculation Agent Mixing of the flocking test solution AuxiliariesMetering Amounts and Mixing of the Post Chlorination Work StepsPerform flocking test Auxiliaries Evaluate flocking testConnecting the Equipment Connections, Valves and IndicatorsPressure-increase Module RO Module with Preliminary FiltersMetering Station Electrical Connections Pressure-increase PumpPreliminary Filter WTC 600 LP / MP Modul Lift Frequency Meter 14/1 14/4 Ing Starting OperationReverse Osmosis System Filter Support pebbles Filter sand / Activated carbon Initial FillingMedia and Activated Carbon Filter Backwashing / RegenerationProgramming Position Indication DescriptionIndication Description Technician Level Technician passwordUser Level Menu SelectionAcknowledging Data Inputs Adjusting Operating Parameters and Balancing ValuesSelecting Several Arguments at the Same De-conservingIndication System in disinfection operating mode Initial startup Untreated Drinking water Concentrade Yield Water CapacityKeys to call up menu item 6 LF limits Normal Operation User indication in normal operationOperating Messages for Normal Operation Putting Out of Operation Desinfection Every 4 weeks Fine FilterMetering Station WTC 600 CD Reverse Osmosis Module RO Module RO Filter ReplacementFilter replacement Replacing the membraneCleaning in Case of Malfunction Assembly and disassembly of the RO filterStarting Position Design of the Flushing and Disinfection EquipmentAids Work Steps Disinfection Acidic and Alkaline Cleaning Conserve the RO system Starting Position Drain the pre-filter Flushing the pre-filter Spare parts possibly required Replace the activated carbon or filter sandSpare parts required Disposing of the replaced filter material Malfunction, Cause and Corrective Action Indication Malfunction Cause Corrective Action ChapMalfunction Indication at the Operating Panel Indication of RO Fuse defective Have replaced by Chap./Fig Maintenance Plan Other Maintenance Maintenance Plan Service Module Work to be Carried OutRO control factory settings GWVOperating mode Switched off WTC 600 MP, MP-A, MP-AM in voltages 230 V and 400RO control program structure Appendix Manual RO 1000 ManualContents Technical Data General Remarks Scope of ApplicationSafety Instructions Instructions for UseScript Examples Terms and DefinitionsDeclaration of Conformity Start-up Function of Terminals Code Function Adm. max. load TerminalOperational Scope Operating settings Not switch offOperating parameters LIMAppendix Stop Operating conditions Denomination Reason Consequence Pressure Switch activeOperating failures/failure messages Forced Stop activeKeyboard Indicator lightsOperation User interface Text displaySelection of menu Password entryBasic elements SelectionAlphanumerical editing MultiselectionNumerical editing ConfirmationsOperating levels Technicians levelUsers Level Menu structure Main menu Menu point FunctionCalibration menu Max CySetting menu Diagnosis menuTechnical Data Min Type Max UnitOperating Record for the WTC 600 LP/MP Automatic Operation List of KEY Words Units and Designations

600 CD specifications

The Karcher 600 CD is an innovative cleaning machine designed to tackle a wide variety of dirt and grime in both professional and domestic settings. Renowned for its efficiency, versatility, and user-friendly design, this powerful equipment is particularly well-suited for cleaning large areas such as driveways, patios, and commercial spaces.

One of the standout features of the Karcher 600 CD is its robust pressure cleaning capability. It boasts a maximum pressure output that effectively removes stubborn stains, embedded dirt, and even algae with minimal effort. The adjustable pressure settings offer the flexibility needed for different surfaces, ensuring that delicate materials are not damaged while still achieving optimal cleaning results.

The Karcher 600 CD employs advanced cleaning technologies such as the patented Dual Nozzle System. This feature ensures a consistent and thorough clean by utilizing two high-pressure nozzles that work in unison. The nozzles are adjustable, allowing users to customize the spray pattern according to the task at hand. Whether it’s rinsing large surfaces or precision cleaning in tight spots, the Karcher 600 CD excels in delivering superior results.

In terms of ergonomics, the Karcher 600 CD is designed for user comfort. It features a lightweight and compact build that allows for easy maneuverability, even in hard-to-reach areas. The integrated handle and wheels enhance portability, making it effortless to transport the machine from one location to another.

Energy efficiency is another key characteristic of the Karcher 600 CD. The machine is engineered to consume less water and energy while still providing powerful cleaning performance. This eco-friendly aspect not only reduces operational costs but also aligns with sustainable cleaning practices.

Furthermore, the Karcher 600 CD comes with a range of accessories and attachments that enhance its functionality. Users can switch between different cleaning tasks seamlessly, whether it’s washing vehicles, cleaning decks, or revitalizing outdoor furniture.

The Karcher 600 CD stands out in the cleaning equipment market for its combination of power, versatility, and efficiency. With its user-centric design and advanced features, it is ideal for homeowners and professionals alike who seek effective and reliable cleaning solutions.