Honeywell LYNXR24 manual LVDUPLQJWKH6\VWHP, 0HPRU\RI$ODUP

6(&85,1*￿7+(￿35(0,6(6￿

'LVDUPLQJ￿WKH￿6\VWHP￿

Use the

2))

key to disarm the system and to silence alarm and trouble sounds. See the SUMMARY

OF AUDIBLE NOTIFICATION section for information, which will help you to distinguish between fire and burglary alarm sounds.

IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. If you return after an alarm has occurred and the main sounder has shut itself off, the keypad will beep rapidly upon entering. This indicates that an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

To disarm the system and silence burglary alarms:

<RXUXVHUFRGH￿2))

The READY indicator will light (if no alarms have occurred while armed) and the keypad will beep once to confirm that the system is disarmed.

0HPRU\￿RI￿$ODUP￿

If an alarm occurs, the keypad displays the zone number (s) that caused the alarm and the type of alarm (e.g., “FIRE ALARM”). These messages remain displayed until cleared by a user.

To clear the display, note the zone number displayed and enter an OFF sequence (enter your security

code and press the

2))

key).

If the READY indicator is blinking, go to the displayed zone and correct the fault (close windows, etc.). If the fault cannot be corrected, notify your alarm company.

– 16 –