Honeywell LYNXR24 manual $8XQFWLRQ, 3HUIRUPLQJWKH$8IXQFWLRQ

86(5￿)81&7,216￿

$8;￿)XQFWLRQ

*HQHUDO￿,QIRUPDWLRQ￿

The

AUX

key may have been programmed to either perform a predefined function or to send a preset

message to a pager/”Follow Me” system phone number (see Pager Feature section for pager operation or the Follow Me Announcement Feature section for “Follow Me” operation). Ask your installer which function has been assigned for your system.

$8;

Key: 35(￿'(),1(')81&7,21 3$*,1*)81&7,21 )2//2:0(92,&(0(66$*(

If programmed for the AUX function, you can use the

$8;

key to activate a string of up to 20

keystrokes that have been stored in the system’s memory. Typical functions include:

•Seldom used but repeatable sequences

•Arming sequences that involve bypassing zones before arming

•Device activation sequences

Defining the AUX Function

The system must be disarmed before defining a function.

1.Enter

0DVWHUXVHUFRGH￿)81&7,21

￿$8;￿KROGGRZQDWOHDVW￿VHFRQGVXQWLO￿EHHSVVRXQG￿￿

2.Press the desired command sequence, up to 20 keystrokes. Press the command in the sequence.

3.Press the $8;key twice to end the definition.

$8;

key between each

For example, to bypass Zones 0 and 11 and arm AWAY with NO DELAY, enter the following string:

0DVWHUXVHUFRGH￿)81&7,21￿$8;￿>￿@￿>￿￿@￿>￿￿@￿$8;￿$:$<￿>￿@￿$8;￿$8;

Note that the

$8;

key is included in the 20 keystroke maximum.

3HUIRUPLQJ￿WKH￿$8;￿IXQFWLRQ￿

Press<RXUandXVHUholdFRGHdown7KHtheGHILQHG$8;IXQFWLRQkey (holdZLOOEHJLQdown￿at least 2 seconds until 4 beeps sound), then enter

– 25 –