86(5)81&7,216
5HPRWH3KRQH&RQWURO)HDWXUH
Enter:
|
|
|
|
|
|
|
|
<RXU | XVHU | FRGH |
| ZLWKLQHLJKWVHFRQGV | |||
|
|
|
|
|
|
|
|
Upon entering remote phone control mode the Lynx will announce “System, enter code”.
Remote Phone Control Commands |
|
To remotely disarm system: <RXUXVHUFRGH | >@ |
To remotely arm in AWAY mode: <RXUXVHUFRGH
To remotely arm in STAY mode: <RXUXVHUFRGH
>@
>@
To remotely arm in AWAY or STAY mode with no delay: <RXUXVHUFRGH | >@RU>@>@ | |||
To remotely activate |
|
|
| |
To remotely activate | >@>@GHYLFHQR | |||
To remotely deactivate | >@>@GHYLFHQR | |||
To remotely deactivate | <RXUXVHUFRGH |
| ||
To remotely Bypass zones: <RXUXVHUFRGH | >@]RQHQR |
|
|
|
To remotely activate Forced Bypass: <RXUXVHUFRGH>@>@
To remotely check system status: [*]
To end remote phone session: +DQJ8SRU<RXUXVHUFRGH
>@
NOTES: (1) Check with your installer to see if the Forced Bypass mode has been enabled.
(2)When bypassing zones, make sure a confirmation beep sounds for each zone that has been bypassed.
– 34 –