Bosch Appliances FW5.50 Establishing the connection, Protected network, 192.168.0.1

Camera Browser Interface Browser connection en 11

1.2Establishing the connection

The camera must have a valid IP address to operate on your network and a compatible subnet mask. By default, DHCP is pre-set at the factory to ON and so your DHCP server assigns an IP address. With no DHCP server the default address is

192.168.0.1

1.Start the Web browser.

2.Enter the IP address of the camera as the URL.

3.During initial installation, confirm any security questions that appear.

Note:

If you do not connect, the camera may have reached its maximum number of connections. Depending on the device and network configuration, each camera can have up to 25 web browser connections, or up to 50 connections via Bosch Video Client or Bosch Video Management System.

1.2.1Password protection in camera

A camera offers the option of limiting access across various authorization levels. If the camera is password-protected, a message to enter the password appears.

1.Enter the user name and the associated password in the appropriate fields.

2.Click OK. If the password is correct, the desired page is displayed.

1.3Protected network

If a RADIUS server is used for network access control (802.1x authentication), the camera must be configured first. To configure the camera, connect it directly to a computer using a network cable and configure the two parameters, Identity and Password. Only after these have been configured can communication with the camera via the network occur.

Bosch Security Systems Software manual AM18-Q0611 v5.50 2012.03