Bosch Appliances FW5.50 software manual Activating and configuring storage media

Page 52

52 en Recording	Camera Browser Interface

SD card recording performance is highly dependent on the speed (class) and performance of the SD card. An SD card of Class 4 or higher is recommended.

Note:

If a device had primary and secondary recording running on the SD card and is then added to a VRM system, the blocks used for primary recording will not be re-used, reducing the available recording space for ANR recording. This can be solved by re- formatting the SD card.

Throughput limit for simultaneous recording and local replay at

100% playback speed is:

–maximum total recording bit rate of 7 Mbps for external iSCSI recording.

–maximum total recording bit rate of 10 Mbps for SD card recording, depending on SD card performance.

10.1.3Activating and configuring storage media

Available media or iSCSI drives must be transferred to the Managed storage media list, activated, and configured for storage.

Note:

A iSCSI target storage device can only be associated with one user. If a target is being used by another user, ensure that the current user no longer needs the target before decoupling that user.

1.In the Storage overview section, double-click the required storage medium, an iSCSI LUN or one of the other available drives.

–The medium is added as a target in the Managed storage media list.

–Newly added media is shown as Not active in the Status column.

AM18-Q0611 v5.50 2012.03

Software manual

Bosch Security Systems

Image 52

Contents Camera Browser Interface Page Table of Contents Advanced General Settings Web InterfaceEncoder Settings CameraAlarm RecordingSetting up VCA Interfaces NetworkService Browser connection System requirementsPassword protection in camera Establishing the connectionProtected network 192.168.0.1Settings System OverviewLivepage RecordingsOperation via the browser Image selectionStatus icons Cameras with PTZ control Motion flagStorage discovery Pan and tiltSystem Log / Event Log Cameras with alarm and relay I/OPre-position Recording video sequences Saving snapshotsRunning recording program Audio communication Processor loadSelecting Recordings Export to FTPControl buttons Controlling playbackSlide control Bookmarks Configuration Menu Settings OverviewBasic Mode Advanced Mode Making Changes NavigationSaving changes Basic Mode Device AccessPassword NamingPassword Confirm passwordDate/Time Device date, time and zoneClick Set and Reboot NetworkIP address Subnet maskEncoder AudioRecording System OverviewAdvanced General Settings Identification1 ID ISCSI Initiator extensionPassword Confirm passwordDate format Device date / Device timeDevice time zone Daylight saving timeTime server IP address Time server typeAlarm mode stamping Display StampingCamera name stamping Time stampingAlarm message Video watermarkingWeb Interface AppearanceLivepage Functions Show system log Allow snapshotsAllow local recording Frame only streamLogging Save event logSave system log File for event logInstaller Menu CameraPicture Settings White balance2 Day/Night Encoder Settings Pixel Counter Select G.711, L16 or AAC* as the audio Recording formatEncoder Settings Pre-defined profiles Encoder ProfileChanging a profile Standard definition video resolution Profile nameTarget bit rate Maximum bit rateExpert Settings Default 1 H.264 settings Select H.264 SettingsEncoder Streams PreviewJpeg stream Recording Storage Management Device managerRecording media ISCSI MediaActivating and configuring storage media Formatting storage media Deactivating storage mediaRecording Profiles Stream profile settingsRecording includes Recording track selection Alarm recordingStandard recording Alarm triggers Motion/Audio alarm Video loss alarmRetention Time Weekdays Recording SchedulerHolidays Activate recording Profile namesRecording status Recording Status Alarm Alarm ConnectionsVideo transmission StreamRemote port Video outputAuto-connect SSL encryptionAudio Video Content Analyses VCA Audio Alarm Alarm E-Mail Attach Jpeg from camera Destination addressSender name Test e-mailSetting up VCA VCA Silent MOTION+VCA Profiles Aggregation time sMotion detector Analysis typeSensitivity Tamper detection Minimum object sizeDebounce time 1 s Selecting the areaTrigger delay s Global change sliderGlobal change Scene too brightScene too noisy Scene too darkReference check Appearing edges VCA Scheduled Deleting Holidays Delay s VCA Event triggeredTrigger Trigger activeInterfaces Alarm inputRelay Network Access NetworkAutomatic IP assignment IP V4 addressIP V6 address DNS server addressHttp browser port Https browser portInterface mode ETH 14.1.8 RCP+ portTelnet support Network MSS ByteEnable DynDNS Network MTU ByteHost name User nameStatus Authentication AdvancedSnmp 14.2.2 1. Snmp host address / 2. Snmp host addressQuality of Service Rtsp portUPnP TCP metadata inputMulticast EnableMulticast Address Streaming PortMulticast packet TTL Jpeg posting FTP PostingFTP server IP V4 filter FTP server passwordPath on FTP server Maintenance ServiceFirmware Configuration SSL certificateMaintenance log Page Bosch Security Systems