62 en Alarm | Camera Browser Interface |
|
|
3.Enter the password in the Destination password field.
4.Set the user password of all the remote stations to be accessed using this password.
Setting destination 10 to the
11.1.5Video transmission
If the device is operated behind a firewall, select TCP (HTTP port) as the transfer protocol. For use in a local network, select UDP.
To enable multicast operation, select the UDP option for the Video transmission parameter here and on the Network page.
Note:
In the event of an alarm, a larger network bandwidth is sometimes required for additional video streams (if multicast operation is not possible).
11.1.6Stream
Select a stream to be transmitted.
11.1.7Remote port
Select an appropriate browser port depending on the network configuration. The ports for HTTPS connections are only available if the On option in SSL encryption is selected.
11.1.8Video output
If a decoder device is used, select the analog video output to which the signal should be switched. If the destination device is unknown, select the First available option. This places the image on the first video output with no signal.
The connected monitor only displays images when an alarm is triggered.
11.1.9Decoder
If a split image is set for the selected video output, select a decoder to display the alarm image. The decoder selected determines the position of the image.
Software manual | Bosch Security Systems |