30 en Advanced General Settings | Camera Browser Interface |
|
|
6.3Date/Time
6.3.1Date format
Select the required date format.
6.3.2Device date / Device time
If there are multiple devices operating in your system or network, it is important to synchronize their internal clocks. For example, it is only possible to identify and correctly evaluate simultaneous recordings when all devices are operating on the same time.
1.Enter the current date. Since the device time is controlled by the internal clock, it is not necessary to enter the day of the week – it is added automatically.
2.Enter the current time or click Sync to PC to apply the system time from your computer to the device.
Note:
It is important that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording.
6.3.3Device time zone
Select the time zone in which the system is located.
6.3.4Daylight saving time
The internal clock can switch automatically between normal and daylight saving time (DST). The device already contains the data for DST
Note:
If a table is not created, there is no automatic switching. When editing the table, note that values occur in linked pairs (DST start and end dates).
Software manual | Bosch Security Systems |