Camera Browser Interface | Recording en 55 |
|
|
10.2.1Recording track selection
Standard and alarm recording can be defined for the two recording tracks. You must first select the track before setting up the standard and alarm recording parameters.
1.Click the Recording 1 entry in the list.
2.Set up the standard and alarm recording parameters for track 1 as described below.
3.Click the Recording 2 entry in the list.
4.Set up the standard and alarm recording parameters for track 2 as described below.
10.2.2Standard recording
Select the mode for standard recordings:
–Continuous: the recording proceeds continuously. If the maximum recording capacity is reached, older recordings are overwritten automatically.
–
–Off: no automatic recording takes place.
Stream
Select the stream to be used for standard recordings:
–Stream 1
–Stream 2
–
10.2.3Alarm recording
Select a period for the
Select a period for the
Alarm stream
Select the stream to be used for alarm recordings:
–Stream 1
–Stream 2
–
Bosch Security Systems | Software manual |