12.3. AI-900MS Master Station Interface Card Connection
12.3.1. Master Station and AI-900MS connection
•The
•Because up to 2
•A station address must be assigned to each connected
[Station Address Setting]
Step 1. Set the Master Station's REGISTER switch to the ON position. The "Reg_mode" indication will be displayed on the station screen.
Step 2. Press the [XFER] key.
Step 3. According to the following table, enter the station address 1 – 4 through the use of a numeric keypad.
Line | Station Address | ||
MS/AL Slot 1 | 1 | 1 | |
2 | 2 | ||
| |||
MS/AL Slot 2 | 1 | 3 | |
2 | 4 | ||
|
Step 4. Press the [PTT] key.
Step 5. Set the REGISTER switch to the OFF position to places the station in standby mode.
View A | [View A ] |
| Display panel |
| ABC | DEF |
|
|
|
1 | 2 | 3 | 1 |
| 2 |
|
|
| |||
GHI | JKL | MNO |
|
|
|
4 | 5 | 6 | 3 |
| 4 |
|
|
| |||
PRS | TUV | WXY |
|
|
|
7 | 8 | 9 | 5 |
| 6 |
|
|
| |||
| OPER |
| 7 |
| 8 |
| 0 | # |
| ||
|
|
|
| ||
P T T | C |
| REDIAL | XFER |
HANDSET | REGISTER | Do not connect thei jack | |
SP. VOL. | OFF ON | to telephone line. | |
|
|
|
LINE
MINI. MAX.
Registration ON/OFF switch
[REGISTER ON/OFF]
Transfer [XFER] key
Numeric keys
[0] – [9]
23