[AI-900AL Telephone Interface Card]
Power Source | 5 V DC, 15 V DC, 24 V DC (supplied from the main frame) | |
|
| |
Current Consumption | 150 mA (5 V DC), 30 mA (15 V DC), 200 mA (24 V DC) | |
|
|
|
Supply Power | 24 V DC, 80 mA |
|
|
|
|
Number of Lines | 2 lines |
|
|
| |
Conversation Recording Output | Audio signal: 0 dB*, unbalanced | |
| Control signal: Open collector output, withstand voltage: 24 V DC, | |
| control current: 20 mA | |
|
|
|
Selectable Signal Type | DTMF signal |
|
|
|
|
Monitoring Function | Line loop detection function |
|
|
| |
Applicable Terminal | Telephone sets to comply with FCC Part 68 | |
|
| |
Control Function | Call signal transmission, audible signal transmission, | |
| caller identification signal transmission (Caller ID Function) | |
|
|
|
Connection Terminal | Main frame connection side: | DIN connector |
| Line output: | |
| Recording audio/control output: | |
|
|
|
Weight | 400 g |
|
|
|
|
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
• Accessories |
|
2 | |
2 | |
Ferrite clamp | 2 |
[AI-900RS Substation Interface Card]
Power Source | 5 V DC, 24 V DC (supplied from the main frame) |
|
|
Current Consumption | 200 mA (5 V DC), 600 mA (24 V DC) |
|
|
Number of Lines | Substation 16 lines |
Number of Links | 2 links (One of 2 links is also used as a Paging Link.) |
|
|
Paging Output | Unbalanced, |
|
|
Paging Input | Balanced, acceptable signals on the 25 V line output from a paging |
| amplifier |
|
|
Conversation Method | |
| conversation by PTT switch |
Supply Power | Maximum 1 W per substation |
|
|
Other | Call button detection function and speech link control function |
|
|
Connection Terminal | Main frame connection side: DIN connector |
| Substation connection side: |
| Paging input/paging output: |
|
|
Weight | 550 g |
|
|
| * 0 dB = 1 V |
Note: The design and specifications are subject to change without notice for improvement.
• Accessories |
|
16 | |
1 |
46