Event Logging Procedures
About Event Logging
The system records various events in a history log, which can be viewed by the master user using an Alpha Display keypad.
•The Event Log holds up to 100 (FA168CPS) or 50 (FA148CP) events.
•Events are displayed in chronological order, from most recent to oldest.
•When the log is full, the oldest event is replaced by the logging of any new event.
Viewing the Event Log
1. | + [#] + | 6 | + | 0 |
(Master Code)
2.The system displays the most recent event as follows: event number, type of event (see table of codes below), zone or user number (depending on type of event) partition in which event occurred, time and date of the event’s occurrence.
3.Pressing [∗] displays previous events (back in time). Pressing [#] displays events forward in time.
4.Exit by pressing any key other than [∗] or [#].
Alpha Displays:
DISARMED
READY TO ARM
001E441 U001 P1 12:34AM 01/02/00
Understanding the Type of Event Displayed
If the event code is preceded by an E (as in the above display), it means that the event is new and ongoing; if preceded by an R, it means the event has been restored. See your installer for more detailed information regarding the meanings of these codes
| Code - Definition | Code - Definition | Code - Definition | Code - Definition | |||||
110 | - Fire Alarm | 301 | - AC Power | 380 | - Global Trouble, Trouble | 442 | - Keyswitch Arm/Disarm STAY | ||
|
|
|
|
|
| Day/Night |
|
|
|
121 | - Duress | 302 | - Low System Battery/Batt | 381 | - RF Supervision Trouble | 459 | - Recent Closing | ||
|
|
|
| Test Fail |
|
|
|
|
|
122 | - Alarm, | 305 | - System Reset (Log only) | 382 | - Supervsn Aux Wire Zone | 570 | - Bypass | ||
123 | - Alarm, | 321 | - Bell/Siren Trouble | 383 | - RF Sensor Tamper | 601 | - Manual Triggered Dialer Test | ||
131 | - Alarm, Perimeter | 333 | - Trble, Exp. Mod. Supervsn | 384 | - RF Sensor | 602 | - Periodic Test | ||
132 | - Alarm, Interior | 341 | - Trble, ECP Cover Tamper | 393 | - Clean Me | 606 | - AAV to Follow | ||
134 | - Alarm, Entry/Exit | 344 | - RF Receiver Jam | 401 | - Disarmed, Armed AWAY, | 607 | - Walk Test Entered/Exited | ||
|
|
|
|
|
| Armed STAY |
|
|
|
135 | - Alarm, Day/Night | 351 | - Telco Line Fault | 403 | - Sched. Arm/Disarm | 623 | - Event Log 80% Full | ||
|
|
|
|
|
| AWAY |
|
|
|
143 | - Alarm, Expansion Module | 353 | - Long Range Radio Trble | 406 | - Cancel by User | 625 | - | ||
|
|
|
|
|
|
|
| (log only) | |
145 | - ECP Module cover tamper | 373 | - Fire Loop Trouble | 407 | - Remote Arm/Disarm | 627 | - Program Mode Entry (log | ||
|
|
|
|
|
|
|
| only) | |
146 | - Silent Burglary | 374 | - Exit Error Alarm | 408 | - Quick Arm AWAY | 628 | - Program Mode Exit (log only) | ||
150 | - Alarm, |
|
| 409 | - Keyswitch Arm/Disarm | 642 | - Latch Key (log only) | ||
|
|
|
|
|
| AWAY |
|
|
|
162 | - Carbon Monoxide |
|
| 441 | - Disarm/Arm/ | 750 | |||
|
|
|
|
| STAY/INSTANT | report codes | |||
|
|
|
|
|
|
|
|
|
|
– 37 –