First Alert FA168CPSSIA, FA148CPSIA manual Manual Paging, Latch Key Paging

Page 29

Paging Feature

Manual Paging

Your system may be set up so you can manually send a message to up to four (FA168CPS) or two (FA148CP) pagers.

•Your installer programs the paging function key and the pager phone numbers.

• Pressing the paging keys sends the message 9 9 9 – 9 9 9 9 to the selected pager.

•This message could mean “call home”, “call your office”, or any other prearranged meaning.

•See the Paging chart at the back of this manual for details of the paging setup for your system.

1.Hold pager key 2 seconds then press pager no. (1-4).*

Press and hold the programmed Paging Key for at least 2 seconds (wait for beep), then press the pager number representing the pager intended to receive the message.

2.The recipient, on seeing the 999–9999 message, will understand the prearranged meaning of this signal.

*If no number is pressed, the message is sent to pager 1. Pagers 1-4 for FA168CPS series; 1-2 for FA148CP series

Alpha Display:

DISARMED

READY TO ARM

Fixed-Word Display: READY

999-9999

Pager Display

Latch Key Paging

You can program a schedule that causes a pager report to be sent if the system is not DISARMED by the scheduled time (see Scheduling section, event “03”). For example, a working parent might want a message to be sent to a pager if their child did not arrive home from school and disarm the system by a certain time.

If programmed, the message that is sent is:

7 7 7 – 7 7 7 7

.

– 29 –

Image 29

Contents FA168CPS / FA168CPSSIA FA148CP / FA148CPSIA About This Manual Table of Contents Event Logging Procedures Using Device Commands Paging FeaturePanic Keys Macro Key Programming & Usage Security Codes & Authority LevelsSystem Basics System OverviewIntroduction Memory of Alarm AlarmsZones and Partitions Arming, Step-Arming and Disarming Burglary ProtectionMessage Center Functions Using the Voice Message Center if Voice Keypad is installedPhone Access General Information About The KeypadsFixed-Word Display Keypad Display Window Functions of the KeypadsStay Entry Delay Entry/Exit DelaysExit Delay Exit Error Conditions Exit AlarmsChecking For Open Zones Using the ∗ KeyTo turn the Voice Status feature on/off # Arming the System Modes of Arming Press these keys… Keypad Confirms By… Arming CommandsQuick Arming Function Key ArmingKey First Press Second Press Third Press Step Arming FeatureSingle Button Arming Using the Keyswitch Using the KeyswitchTo arm in the Away mode To arm in the Stay modeUsing the OFF key Disarming and Silencing AlarmsBypassing Protection Zones Using the Bypass KeyQuick Bypass To turn Chime Mode on Chime ModeTo turn Chime Mode off To turn Voice Chime Mode on or offViewing the Current Date and Time Setting the Date and TimeDate and Time This Function Sends this signal With This Sounding… Using Panic KeysPanic Keys To activate a Panic FunctionAbout Macro Keys Macro Key Programming & UsageExample of Macro Programming Using a Programmed Macro KeyAbout Device Commands Using Device CommandsTo Activate Devices To Deactivate DevicesAbout Automatic Paging Paging FeatureLatch Key Paging Manual PagingAuthority Level Definitions Security Codes & Authority LevelsAbout Security Codes How to Assign Security Codes and Attributes About Accessing Partitions Accessing Other Partitions FA168CPSMulti-Partition Arming Accessing Other PartitionsUsing the GoTo Command Common Zone Operation Creating Schedules SchedulingAbout Scheduling Group Number Partition Start Smtwtfs About Event Logging Event Logging ProceduresViewing the Event Log Understanding the Type of Event DisplayedAbout Testing the System Testing the System To Be Conducted WeeklyTrouble Conditions Check and Battery DisplaysFault AlarmRcvr Jam Or CheckLong Rng Trbl Busy-StandbyMaintaining Your System Silencing Low Battery Warning Tones at KeypadThis Section Applies only to Residential Systems Fire Alarm System If InstalledKey Pairs Individual KeysKitchen Dining Emergency Evacuation Quick Guide to Basic System Functions Function Procedure CommentsFixed-Word Display Keypads Summary of Audible/Visual NotificationsSummary of Audible/Visual Notifications Federal Communications Commission FCC Part Regulatory Statements and WarningsIndustry Canada FCC PartIndustrie Canada Regulatory StatementsFunction Keys Comments Charts of Your System’s FeaturesCharts of Your System’s Features User User’s Parts Security Auth Access RF Zone Pager No. † Paging Setup List of Output Devices Page Page Page Page OWNER’S Insurance Premium Credit Request Cont Limitations of this System ÊK5309-5V4DŠ