DMP Electronics XR500 manual System Options, Instant Arming, Closing Wait, Entry Delay

Page 36

System Options

System Options

9.1

System Options System Options

This section allows you to select system-wide parameters.

9.2

9.3

9.4

SYSTEM: area

AREA A/P H/A GST

INST ARM No YES

Cls wait No YES

System

This option allows you to program how the areas operate for arming and disarming. The options you can choose are listed below:

AREA - All 32 areas can be programmed and operated independently. ALL/PERIMETER - Area 1 is the Perimeter and Area 2 is the Interior.

HOME/SLEEP/AWAY - Area 1 is the Perimeter, Area 2 is the Interior, and Area 3 is the Bedrooms. With the HOME/SLEEP/AWAY option, the user can:

1.Select HOME to arm just the perimeter.

2.Select SLEEP to arm the perimeter and interior (non bedroom areas).

3.Select AWAY to arm all three areas.

Note: A Home/Sleep/Away system can be configured to use all three areas or only use the Home and Away areas.

HOME/SLEEP/AWAY WITH GUEST- This allows the alarm system to be divided into a main house HOME/SLEEP/AWAY system and two other guest houses that also are set up as HOME/SLEEP/AWAY systems.

Areas 1, 2, and 3 are the Perimeter, Interior, and Bedrooms for the Main house system. Areas 4, 5, and 6 are the Perimeter, Interior, and Bedrooms for the Guest 1 house system. Areas 7, 8, and 9 are the Perimeter, Interior, and Bedrooms for the Guest 2 house system. These areas are automatically assigned per system and cannot be changed. See Display Areas in Device Setup to assign keypads to a system. Zones are assigned to a system by assigning the system’s area numbers to the zone in Zone Information programming.

When either All/Perimeter or Home/Sleep/Away is selected, the area names are automatically assigned and cannot be modified.

Note: Areas 3-32 in an All/Perimeter system, areas 4-32 in a Home/Sleep/Away system, and areas 10-32 in a Home/Sleep/Away with Guest system are not available for use and are initialized.

Instant Arming

When YES is selected, the arming keypad displays INSTANT for selection during the exit countdown delay when arming fewer than all areas of the system. At the time instant arming is selected, any entry and exit delays programmed for the areas being armed are ignored. The entry delay for previously armed areas is not affected by instant arming. When NO is selected, INSTANT does not display during arming. Default is NO for an Area System, and YES for an All/Perimeter or Home/Sleep/Away system.

Closing Wait

9.5

Entry dly 1:

30

Entry dly 2:

60

Entry dly 3:

90

Entry dly 4:

120

When YES is selected, the keypad displays ONE MOMENT... while waiting for an acknowledgement from the receiver before arming the selected area(s) and performing a Bell Test (if selected). Exit delays begin after the Closing Wait. Opening/Closing reports must be YES to enable Closing Wait.

Entry Delay 1

Enter the Entry Delay time for all Exit type zones programmed to use Entry Delay 1. When an armed Exit type zone is faulted, the keypad prewarn tone begins sounding. All keypads programmed to prewarn for that zone display ENTER CODE:- and the name of the zone causing the entry delay. When the first digit of a code is entered, the prewarn tone stops at that keypad. If an invalid code is entered, the prewarn tone begins sounding again. The area must be disarmed before the delay expires or an alarm report is sent to the receiver and an alarm sounds. All zones in that area are delayed along with the Exit zone. Entry Delay times can be from 30 to 250 seconds. Repeat the above for each entry delay being used in the system.

Note: Specific Exit Error operation is based on the Entry Delay used (1-4) with an EX type zone. See Exit Delay.

XR500 Series Canadian Programming Guide

Digital Monitoring Products

27

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Programming Guide Industry Canada Notice Table Of Contents Messaging Setup System Reports Bell OptionsOutput Groups Zone Information Area InformationFeature Upgrade StopThis page intentionally left blank Introduction Before you BeginGetting Started Reset Timeout Encrypted Communications XR500N/XR500E onlyProgrammer Operation Programmer Lockout CodesPower Up KeypadsSpecial Keys Entering Alpha Characters Entering Non-Alpha CharactersKeypad Displays Current Programming Special CharactersMultiple Displays Asterisks in ProgrammingDevices Areas Initialization Set to Factory Defaults Clear Communication and Remote OptionsCommunication Path Type Test ReportTest Frequency Test DayReceiver Port First Telephone NumberSecond Telephone Number Advanced ProgrammingSetup String Alarm SwitchDuplicate Alarms Retry SecondsAlarm Reports Door Access ReportSupervisory/Trouble Reports Opening/Closing and User ReportsLocal IP Address Gateway AddressSubnet Mask DNS ServerMessaging Setup Smtp Password Destination 3 User NumberEmail Communication Type Smtp ServerDevice Setup Display Areas User Action AllowedStatus Display Allowed Options and Actions Not AffectedStrike Delay Strike TimeFire Exit Release Output GroupRelock on Zone 2 Fault? 15.1 15.2Program 734 Options Activate Zone 2 Shunt15.6 15.7 15.8 Activate Onboard SpeakerCard Options Custom Card Definitions15.9 Require Site Code15.9 15.10 Site Code DisplayRemote Options Manufacturer Authorization PC ModemAllow Network Remote Network Programming PortEntré Backup IP Address Entré Backup TCP PortEntré Checkin Entré PassphraseSystem Reports Ambush Panic Test Communication XR500N/XR500E onlyEntry Delay System OptionsSystem Instant ArmingReset Swinger Bypass Cross Zone TimeSwgrbyps Trips 1 Swinger Bypass Trips Time Zone ChangesLatch Supervisory Zones Programming Menu LanguageUser Menu and Status List Language City/Time ZoneDetect Wireless Jamming Bypass LimitCard Plus PIN XR500E only House CodeWireless Audible Annunciation Enable Keypad Panic KeysOccupied Premises Enhanced Zone TestBell Options Output Options Panic Alarm Output Sensor Reset Output11.6 11.7 11.8Arm-Alarm Output 11.15Closing Wait Output 11.16Output Information Output Groups Menu Display Status List 15.5 15.6 Burglary ZonesSupervisory Zones Panic ZonesPrinter Reports PC Log Reports Door Acs no YES Door Access Reports 17.1017.11 17.12 PC Log Real-Time StatusArea Information 18.5 18.6 18.7 18.8 18.9 18.10 Closing CheckClosing Code Any Bypass18.10.2 Home/Sleep/Away ProgrammingArea Name Automatic ArmingLate Arm Delay Armed Output NumberLate Output Number Bank Safe & Vault XR500N/XR500E onlyZone Information 19.1Zone Number Zone NameZone Type Specifications 19.5Area Assignment 19.619.7 19.8 Arming Zone Area AssignmentStyle Arming Zone OperationDMP Wireless Wireless19.9 Next ZoneDisarm/Disable 19.10.3 19.10.4 19.10.5 19.10.6 19.10.7 19.10.8LED Operation PIR Pulse CountSeries Key Fobs 19.11.1 19.11.2 19.11.3Key Fob User Number Key Fob Serial Number19.11.7 Button Action19.11.8 Button Press Time19.11.10 19.11.11 19.11.12 Output ActionFA Series Wireless 19.12 Alarm Action19.12.1 19.12.2 19.12.3 Check-in Time19.15 19.16 19.17 Report to TransmitZone Retard Delay Presignal Keypad Addresses19.23 19.2419.25 Priority19.26 Fire Panel Slave InputStop Set Lockout Code21.1 Set Lockout CodeFeature Upgrade False Alarm Reduction Diagnostics functionAppendix Cellular Results Successful Display Failure Display Network Results Successful Display Failure DisplayEmail Results Successful Display Failure Display Successful Display Failure DisplayUsing the 984 Command Function Keypad DisplaysUsing the Walk Test Walk TestZone Types Trip Counter For Walk TestTrip Counter For DMP Wireless Check-in Test WLS Test End WarningFailed Zones Display Keypad Speaker OperationReport Type Immediately Delayed Cross Zoning23.7 Events Manager 23.8 User ProfilesFA Series Transmitter Information Cross TalkWireless Check-in and Supervision Definitions Zone Type SpecificationsKeypad Bus and LX-Bus Zone Type Descriptions Keypad Bus Zone Type Defaults Keypad Bus Zone InformationLX-Bus Zone Type Defaults Zone Type DefaultsMessage Meaning Possible Solutions Common Keypad MessagesArea Account Number Messages Revisions to This Document Intrusion Fire Access Networks Listings and Approvals

XR500 specifications

DMP Electronics has made significant waves in the tech industry with its innovative XR500 device, a cutting-edge solution that caters to both professional and consumer needs. The XR500 combines advanced technologies with a user-friendly design to deliver an exceptional user experience.

One of the standout features of the XR500 is its powerful processing capabilities. Equipped with a high-performance processor, the device ensures seamless multitasking and quick access to applications. This allows users to handle demanding tasks such as gaming, content creation, and data analysis without experiencing lag or slowdown.

In terms of display, the XR500 boasts a stunning high-resolution screen that enhances visual clarity and color accuracy. Whether you are watching videos, playing immersive games, or editing images, the vibrant colors and sharp details make every experience enjoyable. The device also supports high refresh rates, providing fluid motion essential for fast-paced gaming.

Another critical characteristic of the XR500 is its versatility. It features multiple connectivity options including USB-C, HDMI, and Bluetooth, enabling users to connect a wide range of peripherals and accessories. This flexibility makes the XR500 suitable for various applications, whether you're in a creative professional environment or simply enjoying media at home.

DMP has also focused on the XR500's audio quality. Equipped with advanced sound technologies, the device delivers an immersive audio experience. Clear and rich sound enhances gaming and movie-watching experiences, ensuring that every detail is heard. The integrated speakers are supplemented by options for external sound systems, catering to audiophiles and casual listeners alike.

Battery life is a crucial consideration for any electronic device, and the XR500 does not disappoint. It features a robust battery that supports extended usage times, making it ideal for users who are constantly on the move. Additionally, fast-charging capabilities ensure that the device can be quickly recharged, minimizing downtime.

Lastly, the XR500 is designed with a sleek and modern aesthetic, combining form and function. Its lightweight and portable design make it easy to transport, ideal for professionals who need to work on the go. With an emphasis on user experience, the XR500 is not just a device—it's a comprehensive solution that meets the diverse needs of modern users. Whether you are a professional seeking performance or a consumer looking for quality, the DMP Electronics XR500 is a compelling choice that stands out in the market.
Top Page Image Contents