DMP Electronics XR500 19.23, 19.24, Swinger Bypass, Prewarn Keypad Addresses, Zone Retard Delay

Zone Information

19.18Swgr byp no YES

19.19Prewarn KEYPADS:

19.20 Entry Delay: 1

19.21Retard no YES

19.22Presgnl Keypads:

19.23
	Fast Rsp	no	YES
19.24
	Crs Zone	no	YES

Swinger Bypass

Selecting YES allows the zone to be swinger bypassed by the panel according to the specifications programmed­ in Swinger Bypass Trips and Reset Swinger Bypass. The Bypass condition displays in the keypad Status List. Selecting NO disables swinger bypassing for this zone.

How it works

If within one hour, a zone trips the total number of times as specified in Swinger Bypass Trips, the panel bypasses it until the following conditions occur; the area in which the zone is assigned is disarmed, the zone is manually reset through the Bypass Zones? keypad User Menu function, the zone remains normal for one hour and the Reset Swinger Bypass is YES.

If the zone trips fewer than the specified times within one hour, the bypass trip counter returns to 0 (zero) and the process must be repeated.

A report of the swinger bypass is sent to the receiver if Bypass Reports is YES.

Prewarn Keypad Addresses

At the entry delay start, all keypad addresses selected here dis­play ENTER CODE:-. If you want the prewarn to sound at all 16 addresses, leave the default setting.

To delete an address, press the matching number on the keypad. To disable prewarning at all keypads, press a top row Select key to clear the addresses shown. Press the COM­MAND key when the address selection is com­plete.

The prewarn tone stops at the keypad where the first user code digit is entered. If no keys are pressed for five seconds or an invalid user code is entered, the prewarn tone resumes at that keypad.

Entry Delay

Select the entry timer for this zone. Entry timers 1 to 4 are programmed in System Options.

Zone Retard Delay

When you select YES, the zone operates with the zone retard delay. The retard func­tions only in zone short condi­tions.

The zone must re­main shorted for the full length of the re­tard de­lay before the panel recognizes its condition. If you select NO, the zone operates without a retard delay.

Presignal Keypad Addresses

You can enable any combina­tion of keypad addresses to sound a presignal tone during the time a zone is in retard delay. The presignal tone si­lences when the zone restores or the re­tard delay expires.

To en­able a presignal ad­dress, press any top row Select key followed by the number of the keypad address. You can enable the presignal for all 16 keypad addresses. To disable a presignal address press the matching number digit again. Press the COMMAND key when the address selection is complete. The Presignal prompt is only displayed when Retard is selected as YES.

Fast Response

Select YES to provide a zone response time of 167ms. Select NO to provide a normal zone response time of 500ms. Zones 500 to 999 have a fixed response time and do not display this prompt.

Cross Zone

Select YES to enable cross zoning for this zone. Cross zoning requires one or more armed zones to fault within a programmed time before an alarm report is sent to the receiver. When the first cross zoned zone trips, the cross zone time specified in System Options begins to count down. When a second cross zoned zone trips or the first zone trips a second time before the end of the count down, the bell action assigned to the zone activates and the panel sends an alarm report for both zones.

If no other cross zoned zone trips before the cross zone time expires, the panel sends only a zone fault report to the receiver.

Cross zoning is not compatible with all zone types: You can not enable cross zoning for Fire verify zones or for any Fire zones that have Retard Delay enabled.

Digital Monitoring Products XR500 Series Canadian Programming Guide

58