DMP Electronics XR500 manual Communication

Page 17

Communication

Communication

3.1

3.2

3.3

3.4

Communication

Account No: 12345

XMit Delay:

30

path: -

Communication

Configure the communication options for the panel. The information you program varies with the Communication Type you select.

Account Number

The Account Number is a 1 to 5 digit number used to identify which panel is sending a message. Enter the account number sent to the SCS-1R Receiver. Messages may be sent to a central station or via PC Log Reports to a PC. The default is 12345.

NET, CELL, 232 and DD - The range of valid account numbers for a panel is 1 to 65535. For accounts of four digits or less, do not enter leading zeros.

CID - Choose an account number between 1 and 9999.

Transmit Delay

Enter the number of seconds (15 to 45) the panel waits before sending burglary zones (Night, Day, or Exit) reports to the receiver. Other zone type reports are sent immediately. Alarm bells and relay outputs are not delayed during this period. Program Burglary Outputs for pulsed or steady, and set Abort Reports to YES if Opening and Closing reports are not being sent. Enter 0 (zero) to disable this function. The default is 30.

If the area where the alarm occurred is disarmed during the Transmit Delay time, only an Abort Report (S45) message is sent to the receiver. If the area where the alarm occurred is disarmed after the alarm message is sent to the receiver but before the Bell Cutoff time expires even if the alarm was silenced, an Alarm Cancelled (S49) message is sent. Otherwise the alarm is sent at the end of the delay. The Alarm Cancelled report cannot be disabled.

Note: For Commercial Burglary Installations, the combined Transmit Delay (Abort Window) and Entry Delay must not exceed one (1) minute.

Communication Path

Up to eight communication paths may be programmed. Each path is designated as a primary or backup communication route. Path 1 is always Primary but other paths may be programmed as additional primary or backup.

Each primary path establishes a new path group. A path group is made up of the primary path and its subsequent backup paths. Typical communication takes place on the primary path with backup paths being used only when the primary path fails or when the backup path is programmed to duplicate messages. There is no option to backup path 8.

3.5Comm Type: dd

None DD NET CiD

CELL 232

Digital Monitoring Products

Communication Type

Specifies the communication method the panel uses on this path to report system events to DMP SCS-1R Receivers or non-DMP receivers. Default is DD for Path 1, and NONE for Path 2-8.

NONE - For local systems. Selecting NONE ends communication programming.

DD- Digital Dialer communications to a DMP SCS-1R Receiver.

NET - Network communication using the panel onboard network connection. The DMP Network/Output reporting format is transmitted over a data network to the SCS-1R Receiver.

CID - This option allows the panel to communicate to non-DMP receivers using the Contact ID format.

CELL - This option allows communication over the GPRS network using digital cellular technology with the 463G or CellCom Series Digital Cellular Communicator.

232 - This option sends serial data and can be used for radio backup or other communication options, and uses the on-board serial port.

Select 232 when using a 462N Interface Card or DB-9 backup communications by directly connecting to the RS-232 port on the panel. If using the on-board RS-232 port, set the XR500 Series Canadian panel J23 jumper to R and briefly reset the panel using the J16 jumper to activate RS-232 operation. Refer to the XR500 Series Canadian Installation Guide (LT-0681CAN).

XR500 Series Canadian Programming Guide

8

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Programming Guide Industry Canada Notice Table Of Contents Messaging Setup Bell Options System ReportsOutput Groups Area Information Zone InformationStop Feature UpgradeThis page intentionally left blank Getting Started IntroductionBefore you Begin Encrypted Communications XR500N/XR500E only Reset TimeoutProgrammer Operation Programmer Lockout CodesSpecial Keys Power UpKeypads Entering Non-Alpha Characters Entering Alpha CharactersKeypad Displays Current Programming Special CharactersDevices Areas Multiple DisplaysAsterisks in Programming Initialization Clear Communication and Remote Options Set to Factory DefaultsCommunication Test Report Path TypeTest Frequency Test DayFirst Telephone Number Receiver PortSecond Telephone Number Advanced ProgrammingAlarm Switch Setup StringDuplicate Alarms Retry SecondsDoor Access Report Alarm ReportsSupervisory/Trouble Reports Opening/Closing and User ReportsGateway Address Local IP AddressSubnet Mask DNS ServerMessaging Setup Destination 3 User Number Smtp PasswordEmail Communication Type Smtp ServerDevice Setup User Action Allowed Display AreasStatus Display Allowed Options and Actions Not AffectedStrike Time Strike DelayFire Exit Release Output Group15.1 15.2 Relock on Zone 2 Fault?Program 734 Options Activate Zone 2 ShuntActivate Onboard Speaker 15.6 15.7 15.8Card Options Custom Card DefinitionsRequire Site Code 15.915.9 15.10 Site Code DisplayRemote Options PC Modem Manufacturer AuthorizationAllow Network Remote Network Programming PortEntré Backup TCP Port Entré Backup IP AddressEntré Checkin Entré PassphraseSystem Reports Panic Test Communication XR500N/XR500E only AmbushSystem Options Entry DelaySystem Instant ArmingCross Zone Time Reset Swinger BypassSwgrbyps Trips 1 Swinger Bypass Trips Time Zone ChangesProgramming Menu Language Latch Supervisory ZonesUser Menu and Status List Language City/Time ZoneBypass Limit Detect Wireless JammingCard Plus PIN XR500E only House CodeEnable Keypad Panic Keys Wireless Audible AnnunciationOccupied Premises Enhanced Zone TestBell Options Output Options Sensor Reset Output Panic Alarm Output11.6 11.7 11.811.15 Arm-Alarm OutputClosing Wait Output 11.16Output Information Output Groups Menu Display Status List Burglary Zones 15.5 15.6Supervisory Zones Panic ZonesPrinter Reports PC Log Reports 17.10 Door Acs no YES Door Access Reports17.11 17.12 PC Log Real-Time StatusArea Information Closing Check 18.5 18.6 18.7 18.8 18.9 18.10Closing Code Any BypassHome/Sleep/Away Programming 18.10.2Area Name Automatic ArmingArmed Output Number Late Arm DelayLate Output Number Bank Safe & Vault XR500N/XR500E only19.1 Zone InformationZone Number Zone Name19.5 Zone Type SpecificationsArea Assignment 19.6Arming Zone Area Assignment 19.7 19.8Style Arming Zone OperationWireless DMP Wireless19.9 Next Zone19.10.3 19.10.4 19.10.5 19.10.6 19.10.7 19.10.8 Disarm/DisableLED Operation PIR Pulse Count19.11.1 19.11.2 19.11.3 Series Key FobsKey Fob User Number Key Fob Serial NumberButton Action 19.11.719.11.8 Button Press TimeOutput Action 19.11.10 19.11.11 19.11.12Alarm Action FA Series Wireless 19.1219.12.1 19.12.2 19.12.3 Check-in TimeReport to Transmit 19.15 19.16 19.17Presignal Keypad Addresses Zone Retard Delay19.23 19.24Priority 19.2519.26 Fire Panel Slave InputSet Lockout Code Stop21.1 Set Lockout CodeFeature Upgrade Appendix False Alarm ReductionDiagnostics function Network Results Successful Display Failure Display Cellular Results Successful Display Failure DisplayEmail Results Successful Display Failure Display Successful Display Failure DisplayKeypad Displays Using the 984 Command FunctionWalk Test Using the Walk TestZone Types Trip Counter For Walk TestTest End Warning Trip Counter For DMP Wireless Check-in Test WLSFailed Zones Display Keypad Speaker OperationCross Zoning Report Type Immediately Delayed23.7 Events Manager 23.8 User ProfilesCross Talk FA Series Transmitter InformationKeypad Bus and LX-Bus Zone Type Descriptions Wireless Check-in and Supervision DefinitionsZone Type Specifications Keypad Bus Zone Information Keypad Bus Zone Type DefaultsZone Type Defaults LX-Bus Zone Type DefaultsCommon Keypad Messages Message Meaning Possible SolutionsArea Account Number Messages Revisions to This Document Listings and Approvals Intrusion Fire Access Networks

XR500 specifications

DMP Electronics has made significant waves in the tech industry with its innovative XR500 device, a cutting-edge solution that caters to both professional and consumer needs. The XR500 combines advanced technologies with a user-friendly design to deliver an exceptional user experience.

One of the standout features of the XR500 is its powerful processing capabilities. Equipped with a high-performance processor, the device ensures seamless multitasking and quick access to applications. This allows users to handle demanding tasks such as gaming, content creation, and data analysis without experiencing lag or slowdown.

In terms of display, the XR500 boasts a stunning high-resolution screen that enhances visual clarity and color accuracy. Whether you are watching videos, playing immersive games, or editing images, the vibrant colors and sharp details make every experience enjoyable. The device also supports high refresh rates, providing fluid motion essential for fast-paced gaming.

Another critical characteristic of the XR500 is its versatility. It features multiple connectivity options including USB-C, HDMI, and Bluetooth, enabling users to connect a wide range of peripherals and accessories. This flexibility makes the XR500 suitable for various applications, whether you're in a creative professional environment or simply enjoying media at home.

DMP has also focused on the XR500's audio quality. Equipped with advanced sound technologies, the device delivers an immersive audio experience. Clear and rich sound enhances gaming and movie-watching experiences, ensuring that every detail is heard. The integrated speakers are supplemented by options for external sound systems, catering to audiophiles and casual listeners alike.

Battery life is a crucial consideration for any electronic device, and the XR500 does not disappoint. It features a robust battery that supports extended usage times, making it ideal for users who are constantly on the move. Additionally, fast-charging capabilities ensure that the device can be quickly recharged, minimizing downtime.

Lastly, the XR500 is designed with a sleek and modern aesthetic, combining form and function. Its lightweight and portable design make it easy to transport, ideal for professionals who need to work on the go. With an emphasis on user experience, the XR500 is not just a device—it's a comprehensive solution that meets the diverse needs of modern users. Whether you are a professional seeking performance or a consumer looking for quality, the DMP Electronics XR500 is a compelling choice that stands out in the market.
Top Page Image Contents