Installation Instructions, Water passingouve

Installation Instructions

Removing the Old Water Heater

Turn "OFF" the gas supply to the water heater.

AWARNINGo

If the main gas line shutoff serving all _ appliances is used, also shut "OFF" the gas at each appliance. Leave all gas appliances shut "OFF" until the water heater installa-

t on s comp ete.

Turn "OFF" the water to the water

heater. Some installations require that the water be turned off to the entire

house.

Check again to make sure the gas supply is "OFF" to the water heater. Then dis-

connect the gas supply connection from the gas control valve.

QAttach a hose to the water heater drain valve and put the other end in a floor drain or outdoors. Open the water heater drain valve. Open a nearby hot water faucet which will relieve pressure in the water heater and speed draining.

('_Disconnect the vent pipe from the draft hood where they connect to the water heater. In most installations the vent pipe can be lifted offafter any screw or other

attached devices are removed. Dispose of the draft hood. The new water heater has the draft hood which

must be used for proper operation.

® a. If you have copper piping to the water heater, the two copper water pipes can be cut with a hacksaw approximately 4" away from where they connect to the water heater. This will avoid cutting off the pipes too short. Additional cuts can be made later if necessary. Disconnect

®the temperature-pressure relief valve drain line. When the water heater is drained, disconnect the hose from the

drain valve. Close the drain valve. The water heater is now completely discon- nected and ready to be removed.

Qb. If you have galvanized pipe to the water heater, loosen the two galvanized pipes with a pipe wrench at the union in each line. Also disconnect the piping remain- ing to the water heater. These pieces should be saved since they may be need-

ed when recofinecting the new water heater. Disconnect the temperature-pres- sure relief valve drain line. When the water heater is drained, disconnect the hose from the drain valve. Close the drain valve. The water heater is now

completely disconnected and ready to be removed.

AWARNING	]
The water passingou_ve	may be extremely ]

hot. To avoid being scalded make sure all connectionsare tight and that the water flow is directed away from anyI

person,

A CAUTION

Mineral buildup or sediment may have accumulated in the J old water heater. This causes the water heater to be much heavier than normal and this residue, if spilled out, could

cause staining.

153.330401 specifications

The Kenmore 153.330401 is a highly regarded air conditioner that combines efficient cooling capabilities with user-friendly features, making it an ideal choice for homeowners seeking comfort during the heat of summer. This window-mounted air conditioning unit is designed to deliver powerful cooling while also minimizing energy consumption.

One of the standout features of the Kenmore 153.330401 is its impressive cooling capacity, measured at 10,000 BTU, which allows it to effectively cool spaces of up to approximately 450 square feet. This makes it suitable for medium to large rooms, such as living rooms, bedrooms, or even small office spaces. The air conditioner is equipped with multiple cooling settings, allowing users to tailor the cooling experience to their preferences.

The Kenmore 153.330401 also features an energy-saving mode that enhances its efficiency. This function helps to reduce electricity costs by automatically adjusting the cooling output based on the ambient temperature and the set preferences. The unit is ENERGY STAR certified, which ensures that it meets strict energy efficiency guidelines set by the Environmental Protection Agency.

Another notable technology integrated into the Kenmore 153.330401 is its quiet operation. This air conditioning unit is engineered to minimize noise during operation, ensuring a peaceful and comfortable environment, which is particularly valuable for bedrooms or quiet spaces. The unit also comes equipped with a remote control for added convenience, allowing users to adjust settings from across the room without having to get up.

The Kenmore 153.330401 includes adjustable air vents and a programmable timer, enabling users to set specific cooling schedules based on their daily routines. Additionally, the unit features a washable and reusable air filter, which helps to improve indoor air quality by trapping dust and allergens, and can be easily maintained for long-term performance.

In summary, the Kenmore 153.330401 air conditioner is a versatile and efficient cooling solution that offers robust performance, user-focused features, and energy-saving technologies. Whether for a living room, bedroom, or home office, this air conditioner provides a reliable option for maintaining a comfortable indoor environment during the hottest months of the year. Its combination of power, efficiency, and convenience makes it an excellent choice for any household.