Kenmore 580.76t 00, 580.76100 manual DN -BASEPAEA Ottom, Drainage

QSelect the pcsition that wifl place the silt supports near the outermost point on sill (FIG. 10).

Attach the: sitl supports to the cabinet track hole ctosest to the selected position using screw (ITEM E).

O Place the s}i! supports with the cabinet on;the window sill'sselected position.

[]The cabinet should be inSt_lted with a very slight tilt (about 1!4") downward toward the outside (FIG. tl).

Adjust the bolts end the nuts of s_llsupports to leve_ the cabinet.

_TEMB F_G, 11

W Attach _ cabinet to the inner sill by driving the screws (ITEM F) through the Lower Guide i_o the window inner sili (FIG. 12).

f	_	_-_ kow0rGuide
	_TEMB	FIG. 12

_Pull each side curtainfully to each side of

window opening,

Attach each side curtainto the windowsash using screws (ITEM G). (FIG. 13)

_ Attach the L BRACKET (ITEM J) with screw (iTEM G). (F_G. _4)

FiG. 14

_ DRAINAGE

Be sure to Insert the drain pipe into base pan before Instatlat_on.

The air conditfoner must be installed with a slight Utt (_/4 ") downward to the outside for proper drainage of excess condensed water t-}rough the drain pipe.

(FtG,is)

D'N_ -BASEPA'"EA" ]

_OTTOM	F'G'" 1
_ Slide the chassis into the cabinet.	(F}G. 16)

CAUTION: For security purposes, reinstall side screws you removed In step 1.

l

RG, 16

a_Out the: foam strip {ITEM H) to the proper length insert between t_ upper window sash and the

lower window sash. (FIG. 17}

FIG. 17

_oThe vent control handle must be straightened re the decoretive front is attached.

Puli out part _ to align with part _3.

FiG. 1B

-7-