Bryant 551A Unit STD Unit ECONOMI$ER Corner DIM a DIM B DIM C Weight, 963 1092 559

—4—

UNIT	STD UNIT		ECONOMI$ER		CORNER			CORNER			CORNER			CORNER			DIM A		DIM B		DIM C
	WEIGHT		WEIGHT			A			B			C			D
551A
	Lb	Kg	Lb	Kg	Lb		Kg	Lb		Kg	Lb		Kg	Lb		Kg	ft-in.	mm	ft-in.	mm	ft-in.	mm
155	1575	714	80	36.3	407		185	375		170	383		174	410		186	3-5	1039	3-5	1054	1-10	559
180	1650	748	80	36.3	375		170	375		170	449		204	452		205	3-2	963	3-7	1092	1-10	559

NOTES:

1.Refer to print for roof curb accessory dimensions.

2.Dimensions in ( ) are in millimeters.

3. Center of Gravity.

4. Direction of airflow.

5.Ductwork to be attached to accessory roof curb only.

6.Minimum clearance:

•Rear: 7′-0″(2134) for coil removal. This dimension can be reduced to 4′-0″(1219) if conditions permit coil removal from the top.

•Left side: 4′-0″(1219) for proper condenser coil airflow.

•Front: 4′-0″(1219) for control box access.

•Right side: 4′-0″(1219) for proper operation of damper and power exhaust if so equipped.

•Top: 6′-0″(1829) to assure proper condenser fan operation.

•Local codes or jurisdiction may prevail.

7.With the exception of clearance for the condenser coil and the damper/ power exhaust as stated in Note #6, a removable fence or barricade requires no clearance.

8.Dimensions are from outside of corner post. Allow 0′-5/16″ (8) on each side for top cover drip edge.

9.See drawing 50TJ500352 for service option details.

10.A 90 degree elbow must be installed on the supply ductwork below the unit discharge for units equipped with electric heaters.

Fig. 4 — Base Unit Dimensions, 551A155 and 180