Desa VSGF33NRA ON/OFF Series Models Ghrcb and Cghrcb, Thermostat Series Models Ghrctb and Cghrctb

OPERATING FIREPLACE

Continued

2.	Press the MANU button to turn on the
	fireplace.
3.	Press the POWER and LOCK buttons

ON

OFF REMOTE

Flame Adjustment Knob

OL

N
O			O
T		F
	F
O			HI
LIP

together to turn off the fireplace.

Auto (Thermostatic) Mode

1.	Press the POWER and LOCK buttons
	together to turn on the hand-held remote
	control.
2.	Press AUTO button to select this mode.

Selector Switch in Remote	Control Knob
	in On Position
Position (Optional Hand-
Held Remote Control)

Figure 35 - Setting the Selector Switch, Control Knob and Flame Adjustment Knob for Hand-Held Remote Operation

ON/OFF SERIES (MODELS GHRCB AND CGHRCB)

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 36). TO LOCK press both buttons on hand-held remote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed. TO UNLOCK press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Control Button

Turns Burners

On and Off

Figure 36 - On/Off Hand-Held Remote Control Unit (C)GHRCB

THERMOSTAT SERIES (MODELS GHRCTB AND CGHRCTB)

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 37). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1.Press the POWER and LOCK buttons together to turn on the hand-held remote

control.

3.	Set the desired room temperature by press-
4.	ing the TEMP + or - buttons.
	Press the POWER and LOCK buttons
	together to turn off the fireplace.

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fireplace. Ideally, place the hand-held remote in the center of the room facing towards the fireplace. Note: Do not hold the hand-held remote for a long time. Body temperature will affect its operation in the AUTO mode.

Safety Features When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1.If the average room temperature exceeds 82 degrees Fahrenheit (28 degrees Centigrade), the hand-held remote control will perform a safety override and shut the fireplace off. This feature is not available in the MANU mode.

Digital			Turns Hand-
Display
			Held Remote
Shows
			On or Off and
Temperature
			Allows You to
and Settings
			Choose the
Turns			Manual Setting
Burners	On		Selects Auto
or Off
			Setting
Decreases			Increases
Room
			Room
Temperature		Locks System
			Temperature in
in AUTO
		to Prevent
			AUTO Mode
Mode
		Accidental
		Ignition
Figure 37 - Thermostat Hand-Held
Remote Control Unit (C)GHRCTB

107172-01K www.desatech.com 21