INSTALLATION
Continued
1.Place front log on top of the grate. Make sure the notches in the bottom of the log fit over the grate prongs (see Figure 24). Push back of log flush with metal grate bar.
2.Rest middle log behind metal posts on front burner. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts (see Figure 25).
3.Slide the grooves in the back of the rear log against the rear grate prongs. Make sure the peg on the log is on top (see Figure 26).
4.Place the crossover log on the rear log and the middle log. Make sure the peg on the rear log is in the hole in the bottom of the crossover log. The crossover log should fit in the cutout of the middle log (see Figure 27).
5.Install fireplace screen by slipping notches of fireplace screen over screws on front of fireplace (see Figure 28).
WARNING:You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.
Front Log
Notch
Grate 
Prongs
Metal Grate Bar
Figure 24 - Installing Front Log
| Middle Log |
Groove |
|
Metal Post | Groove |
|
Metal Post | Grate |
|
Figure 25 - Installing Middle Log
| Peg | |
Groove in | Rear Log | |
Groove in | ||
Back of Log | ||
| Back of Log | |
Grate Prong |
|
Rear |
|
Burner | Grate |
| |
| Prong |
Figure 26 - Installing Rear Log
Crossover Log
Hole
Cutout 
Peg
Figure 27 - Installing Crossover Log
Notches
Screws for
Mounting Screen
Figure 28 - Installing Fireplace Screen
www.desatech.com | 17 |