Country Flame FP37, FP42, Fireplace FP33 manual Fireplace Furnace Safety Label PP-741, Chimney Size

Page 10

FIREPLACE FURNACE SAFETY LABEL (PP-741)

Model FP33, FP37, FP42 Solid (Wood) Fuel

W/N 11667Fireplace/Furnace

Tested to UL 391, UL 127, UL 1482

Listing Report #32048002-E Electrical Rating: 120 V, 6.5 Amps, 60/50 Hertz

INSTALLATION: Use only chimneys suitable for solid fuel. The use of air filters is not required. Place only on non-combustible flooring with adequate support. Maintain the following clearances to combustibles:

24” = Fireplace Furnace opening to combustible sidewall 24” = Floor level non-combustible hearth extension

8” = Non-combustible hearth extension on each side of opening 12” = Combustible mantle above outlet air grilles

2” = Warm air duct to combustibles Static pressure = 0.25” wc

CHIMNEY SIZE:

Models FP33 and FP 37 use 13” x 13” masonry flue or 10” listed type HT or UL 103 flues. Model FP 42 use 13” x 17” masonry flue or 12” listed type HT or UL 103 flues.

Refer to owner's manual supplied with this appliance. Burn Wood Only. Load fuel carefully or damage may result.

WARNING:

Do not store fuel within the above clearances. Do not use chemical fluids to start the fire.

Do not burn garbage, gasoline, naphtha, engine oil, or other flammable liquids. Inspect and clean chimney regularly.

The heat exchanger, flue pipe, and chimney must be cleaned regularly to remove accumulated creosote and ash. Ensure that the heat exchanger and chimney are cleaned at the end of the heating season to minimize corrosion during the summer months.

CAUTION – Hot surfaces:

Keep children away.

Do not touch during operation.

DURING AN ELECTRICAL POWER FAILURE, IF FIREPLACE DOORS ARE INSTALLED, COMBUSTION AIR CONTROL SHOULD BE OPEN TO ONLY THE MINIMUM SETTING WITH DOORS CLOSED.

In case of a "run-away" fire, be sure all doors are closed tightly and the combustion air control is at the minimum setting.

DO NOT CONNECT THIS UNIT TO A CHIMNEY SERVING ANOTHER APPLIANCE.

Manufactured by: COUNTRY FLAME TECHNOLOGIES Marshfield, MO 65706 Manufacturer Date:

Version 7.1

ix

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation,Operation MaintenanceManual Installation, Operation & Maintenance Manual Table of Contents Version Iii Please keep a copy for your personal records Date Purchased Model No# Serial No# Installed By Trained By Foreword Safety Notes Version Viii Fireplace Furnace Safety Label PP-741 Chimney SizeIntroduction Country Flame Technologies1Chapter WHAT’S Included with Your Smart FIREPLACE?Fireplace Furnace Specifications ModelFireplace Dimensions Steps to Install a Smart Fireplace Footings and FoundationsSingle Opening Fireplace Systems Outside Wall PAD Installation Concrete PAD & Hearth ExtensionsInside Wall PAD Installation Fireplace Position on the Concrete PAD Fireplace Wall & Chimney ConstructionChimney Flue Installation Masonry Wall InstallationTypical HT Adapter optional Installation Model No Angle Iron Duct Size Flue Size Height Depth Masonry Chimney Installation Blower Installations Blower InstallationAIR Intake Grille Installation Heat Discharge Boot Completion of Masonry Brick Front Flue Damper Control Installation Damper PartsDamper Door Removal Damper Door Control Electrical System Thermal Snap Disk LocationElectrical System Version 2Chapter Ducting OptionsDucting Systems Examples Ducting Systems Examples Fireplace Furnace Operational Requirements Internal Thermostat Wood Fireplace Furnace Maintenance Requirements 4ChapterOutside Combustion AIR Troubleshooting Guide Problem Cause SolutionCombustion. Open your draft controls for up Replacement Parts Replacement Parts cont’d Part Drawings Ceramic Snap DISK, PP-91 THERMOSTAT, PP-563 Insulation for TOP, SIDES, FRONT, and BACK, PP-35 ASH Dump COVER, FP-0000-916 Yoke Bracket ASSEMBLY, FP-0000-923 Damper ROD ASSEMBLY, FP-0000-920 FP-33 & FP-37 Flue to HT Chimney ADAPTER, F-218 Grille BACK, FP-0000-33 Grille FRONT, FP-0000-32 AIR Intake GRILLE, PP-560 Adjustable Heat Discharge Boot OPTIONAL, FP-0000-925 LOG Grate optional, LG-900 Company Label Grate Warning Label Country Flame Technologies Required Warranty Information

Fireplace FP33, FP42, FP37 specifications

The Country Flame FP37, FP33, and FP42 fireplaces represent the pinnacle of modern heating technology, with each model expertly designed to meet the diverse demands of homeowners. These fireplaces offer not only warmth but also an aesthetic flair that enhances any living space.

The FP37 is renowned for its substantial heat output, making it an ideal option for larger areas. With a heating capacity of up to 2,800 square feet, it incorporates advanced combustion technology that ensures efficient fuel consumption while maximizing heat production. The innovative air wash system keeps the glass pane clear, providing a spectacular view of the dancing flames. Its multi-fuel capability allows users to burn wood, coal, or pellets, providing flexibility and convenience based on individual preferences.

In contrast, the FP33 is designed for smaller spaces without sacrificing performance. This compact model is capable of heating areas up to 2,000 square feet. Its efficient design promotes quick and easy installation, making it a favorite among homeowners looking for an effective heating solution with a smaller footprint. The FP33 features an adjustable firebox, enabling users to control the intensity of the flames and the heat output according to their needs, ensuring a cozy environment throughout the chilly months.

Meanwhile, the FP42 is a robust option for those seeking a powerful heating source. With a capacity to heat spaces exceeding 3,000 square feet, it features a larger firebox allowing for longer burn times and reduced refueling frequency. Like its counterparts, the FP42 employs a state-of-the-art catalytic converter that enhances burn efficiency and reduces harmful emissions, making it an environmentally responsible choice for heating.

All three models prioritize user-friendliness, with easy-to-use controls and straightforward maintenance. Their durable construction, designed to withstand high temperatures, ensures longevity and reliability. Additionally, all Country Flame fireplaces are backed by an industry-leading warranty, providing peace of mind for owners.

With sleek designs and a variety of options to suit different aesthetics, Country Flame FP37, FP33, and FP42 fireplaces truly embody the blend of functionality and beauty. Whether for a cozy living room or a spacious family area, these fireplaces guarantee a warm and inviting atmosphere, making them an exquisite addition to any home. Choosing any of these models means investing in quality warmth and unmatched comfort for years to come.
Top Page Image Contents