Framing And Finishing

Check ﬁreplace to make sure it is levelled and properly positioned.

To mount the appliance: Choose the location. DV360 (Fig. 5)

1.This unit comes with four (4) ﬂanges pre-mounted on both sides of the ﬁreplace to allow two different drywall thicknesses to be used. Flange “A” is for 1/2” drywall while ﬂange “B“ is for 5/8” drywall.

2.Bend the desired ﬂanges out 90° on both sides of the ﬁreplace. Slide the ﬁreplace into the framed opening until the ﬂanges contact the front surfaces of the framing. Level the unit and secure it ﬁrmly in place.

Flange	Drywall	Flange Location for
Position	Depth	Desired Drywall Depth
A	1/2” / 13 mm
B	5/8” / 16 mm

A B

FP1539

Fig. 5 Drywall ﬂange location for DV360.

DV580 (Fig. 5a)

1.Nailing ﬂanges are supplied with the ﬁreplace (found on the ﬁreplace hearth). To level the box and secure it ﬁrmly in place, remove the nailing ﬂanges from the hearth and install at the sides of the ﬁreplace as shown in Figure 5a.

2.Screw through the slotted holes in the drywall strip and into pre-drilled holes in ﬁreplace side. Measure from face of ﬁreplace to the face of the drywall strip to conﬁrm the ﬁnal depth.

Final Finishing

Noncombustible materials such as brick or tile can be extended over the edges of the face of the ﬁreplace.

Do not cover the window frame assembly, any vent, louvre assembly top or louvre assembly bottom. If a Trim Kit is to be installed, brick and tile will have to be installed ﬂush with the side of this appliance.

DV360/580 Series Direct Vent Gas Fireplace

C	Adjustable Drywall Strip
A	(Nailing Flange)
A
B
	Flange	Drywall
	Position	Depth
	A	1/2” / 13 mm
	B	5/8” / 16 mm
	C	3/4” / 19 mm
	Adjustable
	1/2”, 5/8” & 3/4”
	Spacing
		FP1023
Fig. 5a Adjustable drywall strip (nailing ﬂange) for DV580.

DV360 / DV580

Certiﬁed To

ANSI Z21.88-2005 / CSA 2.33-2005

Vented Gas Fireplace Heater

For units:

GFDN4L2, GFDE4L2, GFDI4L2, GFDL4L2 GFDN4P0, GFDE4P0, GFDI4P0

Gas Speciﬁcations

			MAX.	MIN.
			MAX.	MIN.
		GAS	INPUT	INPUT
MODEL	FUEL	CONTROL	B.T.U.H	B.T.U.H.
DV360RN	Natural Gas	Millivolt Hi/Lo	30,000	18,500
DV360RP	Propane	Millivolt Hi/Lo	30,000	17,000
DV360EN	Natural Gas	24 Volt Hi/Lo	30,000	18,500
DV360EP	Propane	24 Volt Hi/Lo	30,000	20,000
DV360RFN	Natural Gas	Comfort Control	30,000	20,000
DV360RFP	Propane	Comfort Control	30,000	21,000
DV580RN	Natural Gas	Millivolt Hi/Lo	38,000	26,500
DV580RP	Propane	Millivolt Hi/Lo	38,000	27,000
DV580EN	Natural Gas	24 Volt Hi/Lo	38,000	26,500
DV580EP	Propane	24 Volt Hi/Lo	38,000	27,000
DV580RFN	Natural Gas	Comfort Control	38,000	26,500
DV580RFP	Propane	Comfort Control	38,000	27,000

Gas Inlet and Manifold Pressures

	Natural	LP (Propane)
Minimum Inlet Pressure	5.5” w.c.	11.0” w.c.
Maximum Inlet Pressure	14.0” w.c.	14.0” w.c.
Manifold Pressure	3.5” w.c.	10.0” w.c.

20010667

DV580, DV360, DV360 specifications

Vermont Castings is a name synonymous with quality and craftsmanship in the world of fireplaces. Among their celebrated products, the DV580, DV360, and DV360 stand out for their advanced technology, efficiency, and aesthetic appeal. Each of these models offers unique features designed to enhance home heating while maintaining a focus on environmental responsibility.

The DV580 is a powerful direct vent gas stove that seamlessly combines traditional aesthetics with modern functionality. With its large viewing window, it creates a cozy ambiance while allowing users to enjoy the mesmerizing flames. One of its main features is the advanced burner system, which provides a realistic flame appearance. This model also boasts an impressive BTU output, allowing it to heat larger spaces efficiently. The unit is equipped with an electronic ignition, ensuring reliable start-ups even in cold weather.

The DV360, a slightly smaller but equally efficient model, offers versatility for various home settings. With its compact design, it can fit into tighter spaces without sacrificing heating capacity. The DV360 features a unique dual burner system, which promotes a more even and consistent flame. Its direct vent technology ensures that all combustion byproducts are vented outside, maintaining indoor air quality. This model also includes an adjustable flame height, giving users control over the intensity of the heat and ambiance.

In addition to performance, both the DV580 and DV360 prioritize energy efficiency. They are designed to operate with minimal emissions, making them an environmentally friendly choice for homeowners. With a variety of finish options and customizable face designs, these models can complement any home decor. Another key characteristic is the straightforward installation process, which allows homeowners the benefit of having their unit up and running in no time.

Overall, the Vermont Castings DV580, DV360, and DV360 models exemplify a harmonious blend of innovation, functionality, and style. They not only provide warmth but also contribute to the overall aesthetic of any space. With their commitment to quality and performance, Vermont Castings continues to set the standard for direct vent gas stoves, ensuring customers enjoy the best of both worlds: comfort and beauty in their homes.