
Secondary Installation
3.A bag of ceramic fiber embers and rock wool embers is provided gently remove the ember material from the plastic bag. Spread a layer loosely across the burner tray. Do not allow any embers to rest against pilot assembly. (See
diagram provided for proper ember placement.)
4.DO NOT pack this ember material as this could create an unsafe
condition, leave embers loose
5.Upon the first light up, watch for ignition to ALL burner ports. If a long delay is noted: First, wait for the appliance to cool down.
•Open the front door of the appliance.
•Check to carefully reposition the embers making sure that burner ports are not plugged solid or blocked.
Figure 51. Log Placement Step 3.
Figure 52. Log Placement Step 4.
Figure 53. Ember Placement.
32