Maintenance And Service
TO BE INSTALLED BY A QUALIFIED SERVICE AGENCY ONLY
FUEL CONVERSION:
Warning: This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or production of carbon monoxide may result causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper or complete until the operation of the converted appliance is checked as specified in the manufacturer’s instructions supplied with the kit.
Please read and follow these instructions. Also, please read the instruction guidelines provided by S.I.T. on how to remove and install the HI/LO regulator.
Step 1. Step 2.
Step 3.
Carefully inspect all parts supplied with this conversion kit.
Shut the gas supply off at the
Remove the glass as shown in the MAINTENANCE AND SERVICE - OPENING THE DOOR.
Step 4.
Step 5.
Carefully remove the log set and ember material if they are installed.
Remove the two (2) screws (located on the outside edges of the burner) that hold the burner to the chassis inside the fire box, see Figure 9. Remove the
Rotate handles and remove the door and glass.
Pilot assembly moved from firebox for clarity.
Step 6.
Step 7.
burner tray from the firebox.
Change the regulator on the front of the gas valve (follow the instructions provided by S.I.T.).
To change the pilot, simply pull the pilot hood straight up to access the pilot injector. Using a 5/ 32 inch Allen key, remove the pilot injector and replace with the proper fuel type needed.
Using a 1⁄2" deep socket remove/reinstall the main burner orifice.
Venturi adjustment
bracket.
Lift off the pilot head and replace with proper pilot orifice for fuel type to be used.
Undo the two
(2)screws that hold burner in the firebox.
Figure 9: Unit burner shown apart.
10