Secondary Installation
QUALIFIED INSTALLERS ONLY
OPTIONAL FAN KIT INSTALLATION:
The optional fan is thermostatically controlled and it will not operate if the appliance is cold. A few minutes after the appliance is lit and the variable speed control is set at a desired setting, the fan will automatically turn on. The fan will automatically turn off a few minutes after the appliance is shut off.
|
| Fan Control |
|
| |
| Black |
| Black |
|
|
|
|
| 120oF (49oC) |
| Cord |
|
|
| Temperature Sensor |
| |
|
|
|
| White | Electrical |
|
|
|
|
| |
|
|
|
|
| Power |
White |
| Black | Black |
|
|
|
|
|
| Green |
|
| Electrical Cord |
|
| ||
White | Black | Green |
|
|
|
|
|
|
| ||
White | Black | Green/Yellow |
|
| |
|
|
|
| ||
| Fan |
|
|
|
|
The fireplace must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electrical Code Part 1, Safety Standards For Electrical Installations, or The National Electrical Code ANSI / NFPA 70 in the US.
WARNING: The electrical grounding instructions must be followed. The fan kit is equipped with a
CAUTION: When servicing controls, label all wires prior to disconnection. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.
Figure 45. Wiring Diagram For Fan Control.
Kit Contents:
This kit includes a fan assembly (a fan within a box housing connected by a wire to the fan control box then ends at a three prong plug) and two (2)
Please ensure that your fan kit has not been damaged. If so, contact your dealer, distributor, or courier company before starting this installation.
Figure 46. Placing Fan Kit Into DV36
29