BUILT-IN Installation, Wire Nuts | Vanguard VE32LH, VE36LH, VE36LB

INSTALLATION

Continued

5.Snap assembled trim kit onto shoulder screws around face to lock fireplace into mantel facing.

6.Attach mantel to base according to mantle instructions.

BUILT-IN INSTALLATION

Built-in installations require a framed enclo- sure constructed of 2" x 4" or heavier lumber and sized in accordance with Figure 8. This allows unit to slide into opening and be nailed to stud at sides and top nailing flanges. These flanges accept 5/8" drywall or plywood board to finish unit flush to face. Optional trim ac- cessories are available that will extend 1/2" over rough edge of wall opening (see Acces- sories, page 23).

Cabinet

Mantel

Perimeter Trim	Power
Accessory	Cord

Electric

Outlet

Figure 6 - Installing Corner Mantel

IMPORTANT: If installing a perimeter trim kit, you must install shoulder screws before insert- ing fireplace into opening. See instructions included with trim kit. If installing a mantel, you must follow clearance instructions (see Installation Clearances, page 4).

A hearth extension is suggested for a more pleasing appearance. The fireplace may be raised on a wood or non-combustible platform supporting its entire width and depth and extending in front of the fireplace as long as louvers are not obstructed.

Note: When installing fireplace in cold cli- mates against a non-insulated exterior wall, wall must be fully insulated in accordance with local building code.

Platform/Subflooring

VE32 = 32 5/8"

VE36 = 36 1/4"

VE32 = 15 7/8"

VE36 = 17 1/4"

VE32 = 34 5/8"

VE36 = 41 1/4"

Figure 8 - Framing Dimensions

				These Dimensions
VE32 = 37 5/8"				Allow for 11 5/8" of
VE32 = 37 5/8"				Clearance to Side
VE36 = 42 3/8"				Wall of Fireplace
				and 10' Clearance
				and 10' Clearance
VE32 = 26 5/8"				to Perpendicular
VE36 = 29 3/8"				Side Walls
				11 5/8"


				3

Cover Plate

Universal

Strain Relief

Cord Mount

Assembly

VE32 = 52 /4"

VE36 = 58 1/4"

Figure 9 - Corner Dimensions

Wire Nuts

Figure 7 - Relocating Cord Assembly

115121-01Bwww.desatech.com