Avalon Stoves Indoor Fireplace manual 2Installation, Mobile Home Requirements

Page 12

1 2Installation

Mobile Home Requirements

•Outside air is required (used for combustion) - see the directions below.

WARNING: DO NOT INSTALL IN SLEEPING ROOM.

CAUTION: THE STRUCTURAL INTEGRITY OF THE MANUFACTURED HOME FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED.

Outside Air (used for combustion)

•Outside air is optional (except in mobile homes or when required by local building codes).

•Must not be drawn from an enclosed space (garage, unventilated crawl space).

•Must not be over 15' long.

•Must be made with 1 3/4" diameter or larger metal or aluminum duct with a metal screen attached to the end to keep out rodents (P.V.C. or other combustible materials may not be used). Use the Travis Industries Outside Air Kit (part # 99200136).

•Must not terminate above or within 1' of the chimney termination.

•Must have a rain cap or down-turned elbow to prevent water from entering.

•Must be located so that it will not become plugged by snow or other material.

 

 

 

 

 

 

Vent Termination

 

 

 

 

 

 

 

 

 

 

 

 

12” Min.

 

 

 

 

 

 

 

Outside air may be drawn through the chimney (15’ maximum length).

 

Outside air may be drawn

 

 

 

from the ash cleanout.

 

 

Travis

Industries

4 0 5 0 5 2 5

1 0 0 - 0 1 1 4 4

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Astoria Bay Pellet Insert 2Introduction Introduction Important InformationTravis Industries 5 0 5 2 0 0 1 1 4 Table of Contents Safety Precautions Mobile Home 6Specifications Installation7 8Installation Hopper Extension Set-upInstallation9 Re-install the hopper walls following the directions below0Installation Installation1 Venting the Pellet Stove2Installation Mobile Home RequirementsOutside Air used for combustion Baffle Installation Restrictor Adjustment4Installation Surround Panel & Circuit Board InstallationInstallation into a Masonry Fireplace Hint6Installation Installation into a Factory Built Metal FireplaceSafety Notice Operation1Location of Controls Starting the Heater for the First Time8Operation Loading PelletsTwo Modes of Operation Manual Mode To Adjust the HeatTo Start To Shut DownAuto Mode To Adjust Room Temperature or Start the Stove0Operation Adjusting the Fan Speed Operation2Maintenance Required Light 2OperationStart-Up Sequence Auger on LightPower Outages Using a Pellet/Corn Mix with This HeaterManual Auger Button 4Maintenance Daily Maintenance whenever using the heaterInspect the Burn Make Sure Pellets are Not Piling UpMaintenance2 Cleaning the FirepotCheck Firepot for Clinkers 6Maintenance Opening The DoorWeekly Maintenance or every 5 bags of pellets Clean the HopperClean the Heat Exchange Tubes Cleaning the Optional Plated Surfaces8Maintenance Clean the GlassCheck Baffles, Ashbox, Ashpan, Dispose Ash If Necessary Remove the ashbox prior to conducting the service below Sweep Ash Into Ashpan0Maintenance Yearly Maintenance or every tonMaintenance3 Clean the Vent make sure the heater and vent is cool2Maintenance Door SealDoor Alignment Adjusting the Door Hinge and Latch Hinge AdjustmentReplacement Parts Check for Air Leaks Around the Door, Glass, and AshpanNormal Operating Sounds Covection FanSafety Label Serial NoLimited 7 Year Warranty Years 1 & 2 Coverage Parts & Labor8Optional Equipment ThermostatOptional Equipment ZC Kit 9 9 2 0 0 1 40Index

Indoor Fireplace specifications

The Avalon Stoves Indoor Fireplace is a remarkable addition to any home, offering the perfect blend of aesthetics, functionality, and efficiency. Designed with a focus on both beauty and performance, this fireplace redefines the indoor heating experience while enhancing the ambiance of any living space.

One of the standout features of the Avalon Stoves Indoor Fireplace is its clean and contemporary design. Available in various styles and finishes, it fits seamlessly into diverse interior décors, from modern to rustic. The large glass viewing panel provides an expansive view of the flames, allowing users to enjoy the mesmerizing fire while adding warmth to the room.

Energy efficiency is at the heart of Avalon’s design philosophy. The fireplace is equipped with advanced combustion technology that maximizes burn efficiency, ensuring that more heat is extracted from the fuel. This leads to reduced fuel consumption and lower heating costs, making it an environmentally friendly choice. Some models feature a secondary combustion system, which allows the fireplace to burn cleaner, producing fewer emissions and adhering to stringent environmental regulations.

Another significant characteristic of the Avalon Stoves Indoor Fireplace is its versatility in fuel options. Homeowners can choose from traditional wood-burning models or the more contemporary propane and natural gas variants. This flexibility allows users to select the most suitable fuel source for their needs and preferences. The easy-to-use ignition systems further enhance the convenience of starting and maintaining the fire.

Safety features are paramount in the design of Avalon fireplaces. With options for air wash systems that keep the glass clean and cooling features to prevent overheating, users can enjoy a cozy fire with peace of mind. The construction materials are selected for their durability and heat resistance, ensuring that the fireplace stands the test of time.

In summary, the Avalon Stoves Indoor Fireplace combines an elegant design with advanced technology and safety features. Its energy efficiency, versatility in fuel options, and stylish appearance make it a top choice for those looking to add warmth and charm to their home. Whether for heating or simply enjoying the beauty of fire, Avalon offers a fireplace solution that meets modern lifestyles while providing a timeless appeal.
Top Page Image Contents