Regency U37-LP PROPANE, U37-NG NATURAL GAS installation manual Regency, To the New Owner

Page 2

REGENCY

ULTIMATE Rear Vent Direct Vent

Freestanding Gas Stove

To the New Owner:

Congratulations! You are the owner of a state-of-the-art ULTIMATE Rear Vent Direct Vent Gas Stove by FPI Fireplace Products International. The Regency Gas Series of hand crafted appliances has been designed to provide you with all the warmth and charm of a woodstove, at the flick of a switch. The models U37-NG, and U37-LP of this series has been approved by Warnock Hersey for both safety and efficiency. As it also bears our own mark, it promises to provide you with economy, comfort and security for many trouble free years to follow. Please take a moment now to acquaint yourself with these instructions and the many features of your ULTIMATE Rear Vent Direct Vent Freestanding Gas Stove.

INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE

This Regency product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards: ANSI Z21.88b- 2003/CSA 2.33b-2003, and CAN/CGA-2.17-M91.

This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada.

This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes follow the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the current CAN/CGA B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.

This Regency Mobile/Manufactured Home Listed appli- ance comes factory equipped with a means to secure the unit.

This Regency Mobile/Manufactured Home listed appliance comes equipped with a dedicated #8 ground lug to which an 8 gauge copper wire from the steel chassis ground must be attached.

2

U37 Regency ULTIMATE Rear Vent Direct Vent Freestanding Gas Heater

Image 2
Contents Installation Manual Regency To the New OwnerTable of Contents Dimensions de l’orifice Safety LabelCopy of Safety Label for U37 Serial No./No de serie 221General Safety Information InstallationSpecifications Save These InstructionsManufactured Mobile Home Additional Requirements Checklist Combustibles Locating Your Ultimate GAS StoveClearances to Combustion and Ventilation AIRAir supply outlet Planning Your Venting Installation Venting Installation PrecautionsSafety Precautions for Installer See page 7 for Exterior Vent Termination requirementsRigid Pipe Venting Components List 4DT-AJBVent Restrictor Position Straight Vertical TerminationsOffset to Vertical Terminations Alternate Snorkel Termination Cap Horizontal InstallationsOptional Components Snorkel TerminationsHint Apply sealant to female end Alternate Approved Caps Vertical Termination with CO-LINEAR Flex SystemRequired Parts Description General Converting a Factory Built Metal ChimneyConverting a Masonry Chimney Conversion Kit from Natural Gas to Propane GAS Connection Aeration AdjustmentLOG SET Installation High ElevationA02-65 GAS Pipe Pressure Testing Valve DescriptionFinal Check Optional RemoteControl Wiring Diagram Operating Instructions Copy of the Lighting Plate Instructions Temperatures keep children, clothingClean. See installation Maintenance Installing Glass Latch AdjustmentGlass Replacement Never operate your unit with bro- ken glassBefore removing the valve FAN MaintenanceRemoving Valve To remove fanMaintenance Parts List U37 Main AssemblyU37 Burner & LOG Assembly U37 Door Assemblies Warranty ConditionsInstaller Please complete the following information