Regency CS1200 installation manual Masonry Chimney, Masonry Fireplace, Factory Built Chimney

Page 10

INSTALLATION

MASONRY

CHIMNEY

Ensure that a masonry chimney meets the minimum standards of the National Fire Protection Association (NFPA) by having it inspected by a professional. Make sure there are no cracks, loose mortar or other signs of deterioration and blockage. Have the chimney cleaned before the stove is installed and operated. When connect- ing the stove through a combustible wall to a masonry chimney, special methods are needed.

Ensure that an effective vapour barrier at the location where the chimney or other component penetrates to the exterior of the structure.

When referencing installation or connection to masonry fireplaces or chimneys, the masonry construction must or shall be code complying.

MASONRY

FIREPLACE

There are listed kits available to connect a stove to a masonry fireplace. The kit is an adapter that is installed at the location of the fireplace damper. The existing damper may have to be removed to allow installation.

Ensure that an effective vapour barrier at the location where the chimney or other component penetrates to the exterior of the structure.

When referencing installation or connection to masonry fireplaces or chimneys, the masonry construction must or shall be code complying.

FACTORY

BUILT CHIMNEY

When a metal prefabricated chimney is used, the manufacturer's installation instructions must be followed. You must also purchase and install the ceiling support package or wall pass-through and "T" section package, firestops (where needed), insulation shield, roof flashing, chimney cap, etc. Maintain proper clearance to the structure as recommended by the manufacturer. The chimney must be the required height above the roof or other obstructions for safety and proper draft operation. The space heater is to be connected to a factory-built chimney conforming to CAN/ULC-S629, Standard for 6500C Factory-Built Chimneys.

10

Regency CS1200 Freestanding Wood Stove

Image 10
Contents CS1200 Alterra Freestanding Wood Stove Regency Fireplace Product Safety Label Table of Contents Dimensions Unit DimensionsModular Installation Options Residential InstallationRoom AIR Minimum Clearance to Combustible Materials Minimum Alcove Clearance to Combustible Materials Minimum Alcove Clearance to Combustible MaterialsStep by Step Chimney Connector Installation Masonry Fireplace Masonry ChimneyFactory Built Chimney Combustible Wall Chimney Connector PASS-THROUGHS Recommended Heights for Woodstove Flue # of ElbowsMobile Home Installation Listed Components for Mobile Home Installation InstallationBaffle and Tube Installation Brick Installation Door HandleSide Panel Installation Stainless Steel PanelsASH Drawer Option Ash drawer LidLower Surround Door Reversal Left to Right Side OpeningCast Door Reversal Left to Right Side Opening Optional Ashlip Installation Wood StorageFAN Wiring BLOWER/FAN InstallationFAN Operation Draft Control Operating InstructionsFirst Fire Safety Precautions ASH DisposalSafety Guidelines FAN MaintenanceGlass Replacement MaintenanceDoor Catch Adjustment CreosoteParts List Main AssemblyFAN Assembly Fire BrickRegency CS1200 Freestanding Wood Stove Regency CS1200 Freestanding Wood Stove Regency CS1200 Freestanding Wood Stove Warranty Installer Please complete the following information