INSTALLATION 
ASH DRAWER OPTION
1)Open the main top door and the center door on the front of the unit.
4)Push the ash plug into the hole inside the fi rebox and replace all the bricks except for the brick over the ash plug. See brick diagrams in manual.
2)Remove the bricks from the fl oor of the fi rebox.
5)Position ash drawer lid in 'Open' position on the ash drawer lid (towards the front) as shown below.
Ash drawer
lid
6) Slide in ash drawer.
7) Close center door and main top door- once ash drawer is in place.
3)Remove the ash dump cover plates (one inside the fi rebox and one on the underside of the fi rebox - access the lower plate through the center door - it is directly below the upper ash dump plate.) by removing the two nuts and bolts holding the 2 plates together from underneath the stove.
Ash Dump Plates
Ash Plug
Keep ash removal tool handy for maintenance - see ash disposal in operating instructions.
Regency CS1200 Freestanding Wood Stove
17 